Looking for some BUILDERS to teach / guide me

make-nz · September 17, 2023, 7:00am

@piero Docker-Way for this device went through, I got a build (my first)
So thanks to the Team who put all this together!

As my old AMD A6-5200 is a mobile quad-core SoC for low-end laptops from 2013,
I did not think it would make it — well at least I got it up to 16Gb Ram.

I could write a tiny howto, on how I put the system together — minimal Ubuntu Server 22.04 + Docker from Snaps!?

Package Complete: out/target/product/jactivelte/e-1.14-r-20230916-UNOFFICIAL-jactivelte.zip

build completed successfully (16:46:12 (hh:mm:ss))

[Sat Sep 16 23:34:24 UTC 2023] Moving build artifacts for jactivelte to ‘/srv/zips/jactivelte’
[Sat Sep 16 23:34:37 UTC 2023] Finishing build for jactivelte
[Sat Sep 16 23:34:37 UTC 2023] Cleaning source dir for device jactivelte
23:34:42 ************************************************************
23:34:42 You are building on a machine with 15.1GB of RAM
23:34:42
23:34:42 The minimum required amount of free memory is around 16GB,
23:34:42 and even with that, some configurations may not work.
23:34:42
23:34:42 If you run into segfaults or other errors, try reducing your
23:34:42 -j value.
23:34:42 ************************************************************
23:35:46 Entire build directory removed.

CPU & RAM

Edit: And flashed and tested on the device now:

piero · September 17, 2023, 10:10pm

hi, i am back for some hours.

i have some points to clarify :

@make-nz

in “nmon”, i only see activity on my main Hard Drive sdc1 (/) and sdc3 (swap). i don’t see any activity on my dedicated to /e/build Hard Drive sdb1 (where sources are stored) is it because it is mounted in “/home/antec” ( for permissions reasons) and not to directly “/” ? do ineed to mount it directly to “/” ( but with user permissions)

@make-nz
2. is it usefull to setup zRAM and how ?

@aibd

3. is my local_manifest is good ?

<?xml version="1.0" encoding="UTF-8"?>

<!-- KERNEL
#####################################################-->

<project path="kernel/samsung/msm8930-common"
         name="LineageOS/android_kernel_samsung_msm8930-common" 
         remote="github" 
         revision="lineage-18.1" />
         
<!-- DEVICE TREES
#####################################################-->


<project path="device/samsung/qcom-common"
         name="LineageOS/android_device_samsung_qcom-common"
         remote="github"
         revision="lineage-18.1" />
         
<project path="device/samsung/msm8930-common"
         name="LineageOS/android_device_samsung_msm8930-common"
         remote="github"
         revision="lineage-18.1" />
         
<project path="device/samsung/serrano-common"
         name="LineageOS/android_device_samsung_serrano-common"
         remote="github"
         revision="lineage-18.1" />
         
<project path="device/samsung/serranoltexx"
         name="LineageOS/android_device_samsung_serranoltexx"
         remote="github"
         revision="lineage-18.1" />
         
<project path="device/samsung/serranoltespr"
         name="LineageOS/android_device_samsung_serranoltespr"
         remote="github"
         revision="lineage-17.1" />
         
<project path="device/samsung/serranolteusc"
         name="LineageOS/android_device_samsung_serranolteusc"
         remote="github"
         revision="lineage-17.1" />

<!-- HARDWARE
#####################################################-->
<project path="hardware/samsung"
         name="LineageOS/android_hardware_samsung"
         remote="github" />
         
<!-- /e/ vendor repo
#####################################################-->
<project path="vendor/samsung"
         name="TheMuppets/proprietary_vendor_samsung"
         remote="github"
         depth="1" />
         
<project path="vendor/e"
         name="steadfasterX/android_vendor_e"
         remote="e"
         revision="v1-r" />

<!-- vendor extendrom
##################################################### -->
<remote  name="sfX"
         fetch="https://github.com/sfX-Android/" />
       
<project path="vendor/extendrom"
         name="android_vendor_extendrom"
         remote="sfX"
         revision="main" />

(from my point of view, i see two devices with 17.1 branch instead of 18.1)

@aibd

4. is my vendor.sh is good ?

#!/bin/bash
#######################################################################################
export EOS_USE_CCACHE=true
export EOS_CCACHE_DIR=/home/antec/android/e/ccache/eos
export EOS_CCACHE_SIZE=100G
export EOS_DEVICE=serranoltexx
export EOS_BRANCH_NAME=“v1-r”
export EOS_RELEASE_TYPE=“UNOFFICIAL”
export MINIMAL_APPS=“$EOS_MINI_APPS”
export EOS_MINI_APPS=true
export RECOVERY_IMG=“$EOS_SAVE_RECOVERY”
export EOS_SIGNATURE_SPOOFING=restricted
export EOS_INCLUDE_PROPRIETARY=true

########### extendrom section ###########
$PWD/vendor/extendrom/get_prebuilts.sh
export ENABLE_EXTENDROM=true
export EXTENDROM_PACKAGES="noMagicEarth noVOSK noPicoTTS noeSpeakTTS noPdfViewer

(from my point of view, there are indefinified strings)

aibd · September 17, 2023, 11:01pm

Your vendor_e and extendrom should be as post #122. Did you not get to save a roomservice.xml from a previous build ?

revision="lineage-18.1" | revision="lineage-17.1"

Is ^^ required ?

I don’t think you can hash lines out with #, better 

White space … in chunks, is not usually seen in .xml format https://www.oracle.com/technical-resources/articles/wang-whitespace.html

Must include

<manifest> | </manifest>

piero · September 17, 2023, 11:27pm

they are.

i don’t understand.

have deleted the lines.

have corrected.

i think it does.

aibd · September 18, 2023, 3:24am

In general one would attempt a first build where the available components for the whole project were the same Android version. Then Android version can be set with repo init.

You did your research, so I should assume it is correct.

Here is an example where I attempted to mix revisions

  <project path="device/samsung/universal7870-common" remote="samsungexynos7870" name="android_device_samsung_universal7870-common" revision="lineage-18.1" />
  <project path="kernel/samsung/exynos7870" remote="samsungexynos7870" name="android_kernel_samsung_exynos7870" revision="master" />

piero · September 18, 2023, 4:26am

in my local_manifest, i have deleted reference to the two additional devices covered by the build codename but with outdated branch (serranoltespr and serranolteusc) because repo sync stay stuck for a while at 99% related to those devices

piero · September 18, 2023, 4:34am

antec@antec-p6-2038fr:~/android/e/R$ source build/envsetup.sh > envsetup_01.txt
find: ‘/home/antec/android/e/R/out/target/product’: Aucun fichier ou dossier de ce type
find: ‘/home/antec/android/e/R/out/target/product’: Aucun fichier ou dossier de ce type
find: ‘/home/antec/android/e/R/out/target/product’: Aucun fichier ou dossier de ce type

because there is no existing /out/target folder.

source build/envsetup.sh > envsetup_01.txt

including device/samsung/serranoltexx/vendorsetup.sh

************************************************** STARTING EXTENDROM **************************************************

ENABLE_EXTENDROM: true
EXTENDROM_PACKAGES: noMagicEarth noVOSK noPicoTTS noeSpeakTTS noPdfViewer
EOS_EDITION:
EXTENDROM_SIGNING_PATCHES:
EXTENDROM_SIGNATURE_SPOOFING:
EXTENDROM_SIGSPOOF_RESET:
EXTENDROM_SIGSPOOF_FORCE_PDIR:
EXTENDROM_TARGET_VERSION: 11
EXTENDROM_TARGET_PRODUCT: aosp
SRC_TOP: ./
EXTENDROM_PRODUCT_DEVICE=generic
EXTENDROM_BOOT_DEBUG=
EXTENDROM_DEBUG_PATH=/data/vendor_de (will be suffixed with /boot_debug)
EXTENDROM_DEBUG_PATH_SIZE_FULL=5000 KB
EXTENDROM_DEBUG_PATH_SIZE_CRASH=500 KB
EXTENDROM_DEBUG_PATH_SIZE_KERNEL=500 KB
EXTENDROM_DEBUG_PATH_SIZE_SELINUX=500 KB
e[0;31mERROR: missing required binary: aapte[0m

e[0;31mbash stack trace (first occurence is likely where you should look at):e[0m

e[0;31mERROR: last command ended with status >1< at line >142<e[0m
including vendor/e/vendorsetup.sh

[lun. 18 sept. 2023 06:28:21 CEST] Reset variables finished
including device/samsung/serranoltexx/vendorsetup.sh

************************************************** STARTING EXTENDROM **************************************************

ENABLE_EXTENDROM: true
EXTENDROM_PACKAGES: noMagicEarth noVOSK noPicoTTS noeSpeakTTS noPdfViewer
EOS_EDITION:
EXTENDROM_SIGNING_PATCHES:
EXTENDROM_SIGNATURE_SPOOFING:
EXTENDROM_SIGSPOOF_RESET:
EXTENDROM_SIGSPOOF_FORCE_PDIR:
EXTENDROM_TARGET_VERSION: 11
EXTENDROM_TARGET_PRODUCT: aosp
SRC_TOP: ./
EXTENDROM_PRODUCT_DEVICE=generic
EXTENDROM_BOOT_DEBUG=
EXTENDROM_DEBUG_PATH=/data/vendor_de (will be suffixed with /boot_debug)
EXTENDROM_DEBUG_PATH_SIZE_FULL=5000 KB
EXTENDROM_DEBUG_PATH_SIZE_CRASH=500 KB
EXTENDROM_DEBUG_PATH_SIZE_KERNEL=500 KB
EXTENDROM_DEBUG_PATH_SIZE_SELINUX=500 KB
e[0;31mERROR: missing required binary: aapte[0m

e[0;31mbash stack trace (first occurence is likely where you should look at):e[0m

e[0;31mERROR: last command ended with status >1< at line >142<e[0m
including vendor/e/vendorsetup.sh
… auto-detected CPU count: 4
… will use this thread count: 3
not exporting special var CCACHE_COMPRESS as it is an unset variable
not exporting special var CCACHE_NOCOMPRESS as it is an unset variable
emptied MIRROR ><
emptied OTA_URL ><
emptied CUSTOM_PACKAGES ><

!!!
******** /e/ - set JAVA ********
!!!

[lun. 18 sept. 2023 06:28:36 CEST] Determining correct OpenJDK version for v1-r
… checking if we need to switch Java version
… skipping touching java as we use a shipped one (/home/antec/android/e/R/prebuilts/jdk/jdk11/linux-x86)
[lun. 18 sept. 2023 06:28:36 CEST] Using Java JDK /home/antec/android/e/R/prebuilts/jdk/jdk11/linux-x86

!!!
******** /e/ - INIT ********
!!!

[lun. 18 sept. 2023 06:28:36 CEST] Preparing build environment
[lun. 18 sept. 2023 06:28:36 CEST] DEBUG: ROOT_DIR is set to: >/home/antec/android/e/R/.e/root<
Set cache size limit to 100.0 GB

!!!
******** /e/ - POSTSYNC ********
!!!

[lun. 18 sept. 2023 06:28:36 CEST] Setting “UNOFFICIAL” as release type
[lun. 18 sept. 2023 06:28:36 CEST] Adding keys path (/home/antec/android/e/R/.e/keys)
Switch back to Python3

============================================
/e/ build variables:

EOS_DEVICE=“serranoltexx”
DEBUG_LOG=“/home/antec/android/e/R/.e/logs/e-20230918-UNOFFICIAL-serranoltexx.log”
_MAX_THREADS=“3”
MAX_THREADS_ARG=“-j 3”
USE_CCACHE=“1”
CCACHE_EXEC=“/usr/bin/ccache”
CCACHE_DIR=“/home/antec/android/e/ccache/eos”
CCACHE_SIZE=“100G”
CCACHE_COMPRESS=“”
CCACHE_NOCOMPRESS=“true”
CCACHE_COMPRESSLEVEL=“6”
BRANCH_NAME=“v1-r”
RELEASE_TYPE=“UNOFFICIAL”
REPO=“https://gitlab.e.foundation/e/os/releases.git”
MIRROR=“”
OTA_URL=“”
USER_NAME=“xxxxxxxxxxxxxxxxx”
USER_MAIL="xxxxxxxxxxxxxxxxx@murena.io"
INCLUDE_PROPRIETARY=“false”
BUILD_OVERLAY=“false”
LOCAL_MIRROR=“false”
CRONTAB_TIME=“now”
CLEAN_AFTER_BUILD=“false”
CLEAN_BEFORE_BUILD=“false”
WITH_SU=“false”
ANDROID_JACK_VM_ARGS=“-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx8G”
CUSTOM_PACKAGES=“”
SIGN_BUILDS=“true”
KEYS_SUBJECT=“/C=DE/ST=Somewhere/L=Somewhere/O=xxxxxxxxxxxxxxxxxx/OU=e/CN=eOS/emailAddress=android@android.local”
KEYS_SUBJECT=“/C=DE/ST=Somewhere/L=Somewhere/O=xxxxxxxxxxxxxxxxx/OU=e/CN=eOS/emailAddress=android@android.local”
ZIP_SUBDIR=“true”
LOGS_SUBDIR=“true”
SIGNATURE_SPOOFING=“restricted”
DELETE_OLD_ZIPS=“0”
DELETE_OLD_LOGS=“0”
EOS_BUILD_DATE=“20230918”
TMP_DIR=“/home/antec/android/e/R/.e/tmp”
ZIP_DIR=“/home/antec/android/e/R/.e/zips/serranoltexx”
SYNC_RESET=“0”
KEYS_DIR=“/home/antec/android/e/R/.e/keys”
MINIMAL_APPS=“true”

aibd · September 18, 2023, 4:54am

This is true before the build starts !

Look for a clue in build/envsetup.sh line 142 reads local T=$(gettop).

The subject was

# check to see if the supplied product is one we can build
function check_product()

e[0;31m    <e[0m

are to do with Git shell coloring

piero · September 18, 2023, 5:13am

.repo/local_manifest/eos.xml

<?xml version="1.0" encoding="UTF-8"?>

<!-- KERNEL
#####################################################-->

<project path="kernel/samsung/msm8930-common"
         name="LineageOS/android_kernel_samsung_msm8930-common" 
         remote="github" 
         revision="lineage-18.1" />
         
<!-- DEVICE TREES
#####################################################-->


<project path="device/samsung/qcom-common"
         name="LineageOS/android_device_samsung_qcom-common"
         remote="github"
         revision="lineage-18.1" />
         
<project path="device/samsung/msm8930-common"
         name="LineageOS/android_device_samsung_msm8930-common"
         remote="github"
         revision="lineage-18.1" />
         
<project path="device/samsung/serrano-common"
         name="LineageOS/android_device_samsung_serrano-common"
         remote="github"
         revision="lineage-18.1" />
         
<project path="device/samsung/serranoltexx"
         name="LineageOS/android_device_samsung_serranoltexx"
         remote="github"
         revision="lineage-18.1" />
         
<!-- HARDWARE
#####################################################-->
<project path="hardware/samsung"
         name="LineageOS/android_hardware_samsung"
         remote="github" />
         
<!-- /e/ vendor repo
#####################################################-->
<project path="vendor/samsung"
         name="TheMuppets/proprietary_vendor_samsung"
         remote="github"
         depth="1" />
         
<project path="vendor/e"
         name="steadfasterX/android_vendor_e"
         remote="e"
         revision="v1-r" />

<!-- vendor extendrom
##################################################### -->
<remote  name="sfX"
         fetch="https://github.com/sfX-Android/" />
       
<project path="vendor/extendrom"
         name="android_vendor_extendrom"
         remote="sfX"
         revision="main" />

OK

/device/samsung/serranoltexx/vendorsetup.sh

#!/bin/bash
#######################################################################################
export EOS_USE_CCACHE=true
export EOS_CCACHE_DIR=/home/antec/android/e/ccache/eos
export EOS_CCACHE_SIZE=100G
export EOS_DEVICE=serranoltexx
export EOS_BRANCH_NAME=“v1-r”
export EOS_RELEASE_TYPE=“UNOFFICIAL”
export MINIMAL_APPS=“$EOS_MINI_APPS”
export EOS_MINI_APPS=true
export RECOVERY_IMG=“$EOS_SAVE_RECOVERY”
export EOS_SIGNATURE_SPOOFING=restricted

########### extendrom section ###########
$PWD/vendor/extendrom/get_prebuilts.sh
export ENABLE_EXTENDROM=true
export EXTENDROM_PACKAGES=“noMagicEarth noVOSK noPicoTTS noeSpeakTTS noPdfViewer”

discutable because :

antec@antec-p6-2038fr:~/android/e/R$ source build/envsetup.sh > envsetup_01.txt
find: ‘/home/antec/android/e/R/out/target/product’: Aucun fichier ou dossier de ce type
find: ‘/home/antec/android/e/R/out/target/product’: Aucun fichier ou dossier de ce type
find: ‘/home/antec/android/e/R/out/target/product’: Aucun fichier ou dossier de ce type

aibd:

This is true before the build starts !

piero:

e[0;31mERROR: last command ended with status >1< at line >142<e[0m

Look for a clue in build/envsetup.sh line 142 reads local T=$(gettop).

The subject was
# check to see if the supplied product is one we can build
function check_product()

/build/envsetup.sh

so i continue with

`breakfast serranoltexx`

antec@antec-p6-2038fr:~/android/e/R$ breakfast serranoltexx
Looking for dependencies in device/samsung/serranoltexx
Looking for dependencies in device/samsung/serrano-common
Looking for dependencies in device/samsung/qcom-common
Looking for dependencies in hardware/samsung
hardware/samsung has no additional dependencies.
Looking for dependencies in device/samsung/msm8930-common
device/samsung/msm8930-common has no additional dependencies.
Looking for dependencies in kernel/samsung/msm8930-common
kernel/samsung/msm8930-common has no additional dependencies.

============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=11
LINEAGE_VERSION=1.15""-r-20230918-UNOFFICIAL-serranoltexx
TARGET_PRODUCT=lineage_serranoltexx
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_ARCH=arm
TARGET_ARCH_VARIANT=armv7-a-neon
TARGET_CPU_VARIANT=generic
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-5.15.0-83-generic-x86_64-Ubuntu-20.04.6-LTS
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=RQ3A.211001.001
OUT_DIR=out
PRODUCT_SOONG_NAMESPACES=vendor/samsung/serrano-common device/samsung/serrano-common vendor/samsung/serranoltexx hardware/qcom-caf/msm8960 vendor/qcom/opensource/data-ipa-cfg-mgr vendor/qcom/opensource/dataservices packages/apps/Bluetooth
WITH_SU=false

and

mka eos

result in "out of system space"

Out of space? Out of inodes? The tree size of /home/antec/android/e/R/out/soong/.temp/tmpdSgQ9X is 1771503616 bytes (1689 MB), with reserved space of 0 bytes (0 MB).
The max image size for filesystem files is 1572864000 bytes (1500 MB), out of a total partition size of 1572864000 bytes (1500 MB).
12:44:33 ninja failed with: exit status 1

failed to build some targets (05:30:05 (hh:mm:ss))

.

but difference is less than the last time

Out of space? Out of inodes? The tree size of /home/antec/android/e/R/out/soong/.temp/tmpP4gD4X is 1909393408 bytes (1820 MB), with reserved space of 0 bytes (0 MB).
The max image size for filesystem files is 1572864000 bytes (1500 MB), out of a total partition size of 1572864000 bytes (1500 MB).

aibd · September 18, 2023, 11:36am

Your extendrom list has not knocked out sufficient “weight”. It is not linear but check the “weight” of prebuilts here Looking for some BUILDERS to teach / guide me - #79 by aibd. (Browser is large but not that large !)

I think MINIMAL_APP=true already eliminated MagicEarth and PdfViewer. I mentioned already the different permutations I tried with this link Looking for some BUILDERS to teach / guide me - #126 by aibd

piero · September 18, 2023, 12:05pm

that was my sort of “MINIMAL_APPS” build test to keep “UNOFFICIAL”.

i had also prepared a sort of “RADICAL_MINIMAL_APPS” but it is clearly “CUSTOM” :

vendorsetup.sh

#!/bin/bash
#######################################################################################
export EOS_USE_CCACHE=true
export EOS_CCACHE_SIZE=100G
export EOS_CCACHE_DIR=/home/antec/android/e/ccache/eos
export EOS_DEVICE=serranoltexx
export EOS_BRANCH_NAME=“v1-r”
export EOS_RELEASE_TYPE=“CUSTOM_SLIM”
export EOS_MINI_APPS=true
export EOS_SIGNATURE_SPOOFING=restricted
export EOS_SAVE_RECOVERY=true

########### extendrom section ###########
$PWD/vendor/extendrom/get_prebuilts.sh
export ENABLE_EXTENDROM=true
export EXTENDROM_PACKAGES=“noApps noGmsCore noFakeStore noMozillaNlpBackend noNominatimNlpBackend noGsfProxy noTalkback noVOSK noPicoTTS noeSpeakTTS noMagicEarth noPdfViewer noOpenWeatherMapWeatherProvider noWebCalendarManager noNotes”

what do you think about this exclusion list ?

aibd · September 18, 2023, 12:45pm

My inclination is to get something to build so that you can boot it and see the behaviour even if you knock out too much.

Your second build in this environment will be much faster, so the cost of “experimentation” is lower.

You appear to have 1.4 G available, while bacon has 1.2G.

You might double check the /e/ OS packages which your build environment proposes to install by looking here /vendor/lineage/config/common.mk about line 140.

Avoid duplication

“noApps noGmsCore noFakeStore noMozillaNlpBackend noNominatimNlpBackend noGsfProxy noPicoTTS noeSpeakTTS noMagicEarth noPdfViewer noOpenWeatherMapWeatherProvider”

MINIMAL_APP=true already eliminated MagicEarth and PdfViewer

@piero duplication is noMagicEarth noPdfViewer.

piero · September 18, 2023, 12:57pm

what i did just now was :

modify device/samsung/serranoltexx/vendorsetup.sh
here i must have missed something…

then,

antec@antec-p6-2038fr:~/android/e/R$ source build/envsetup.sh > envsetup_01.txt
antec@antec-p6-2038fr:~/android/e/R$ breakfast serranoltexx
antec@antec-p6-2038fr:~/android/e/R$ mka eos

because it return exactly the same result as previous build :

Out of space? Out of inodes? The tree size of /home/antec/android/e/R/out/soong/.temp/tmpxNs5JT is 1771505664 bytes (1689 MB), with reserved space of 0 bytes (0 MB).
The max image size for filesystem files is 1572864000 bytes (1500 MB), out of a total partition size of 1572864000 bytes (1500 MB).
ninja: build stopped: subcommand failed.

#### failed to build some targets (07:09 (mm:ss)) ####

.

because /source/build/envsetup.sh was unchanged ! since 02h00 (UTC)

aibd · September 18, 2023, 1:44pm

Use of run is not correct (maybe the inclusion of lunch helps)

From https://github.com/sfX-android/android_vendor_extendrom/wiki/Setup

The regular build process should always be like:

source build/envsetup.sh
lunch lineage_j5y17lte-user
mka otapackage
# (or mka eos when buildin /e/)

Also the use of > envsetup_01.txt may be unhelpful for small edits.

piero · September 18, 2023, 1:57pm

antec@antec-p6-2038fr:~/android/e/R$ source build/envsetup.sh
antec@antec-p6-2038fr:~/android/e/R$ lunch lineage_serranoltexx-user
antec@antec-p6-2038fr:~/android/e/R$ mka eos

) violated by allow vendor_fm_app bluetooth_prop:file { read getattr map open };
libsepol.report_failure: neverallow on line 10 of system/sepolicy/public/apexd.te (or line 9517 of policy.con
f) violated by allow system_app apexd:binder { call };
libsepol.report_failure: neverallow on line 9 of system/sepolicy/public/apexd.te (or line 9516 of policy.conf
) violated by allow system_app apex_service:service_manager { find };
libsepol.check_assertions: 119868 neverallow failures occurred
Error while expanding policy
15:53:35 ninja failed with: exit status 1
ninja: build stopped: subcommand failed.

#### failed to build some targets (03:07 (mm:ss)) ####

latest error.log (13h54 UTC)

maybe lunch eos_serranoltexx-user will be a better idea ?

but `/source/build/envsetup.sh` is still unchanged since 02h00 UTC ! (am)

aibd · September 18, 2023, 2:07pm

I think user is wrong ! (in this case)

Edit suggested confirmed – https://forum.xda-developers.com/t/thousands-of-violations-against-neverallows-in-building-user-variant.4207045/. One could look for a cause later.

user:
Limited access; suited for production

userdebug:
Like user but with root access and debug capability; very close to production performance

eng:
Development configuration with faster build time; most suited for day-to-day development

https://source.android.com/docs/setup/build/building.

piero · September 18, 2023, 2:09pm

so, lunch eos_serranoltexx-userdebug ?
.
also i think about redoing repo sync… edit : i do

aibd · September 18, 2023, 3:04pm

eos_serranoltexx-userdebug

userdebug (or even eng)
but no to eos_serranoltexx-userdebug

piero · September 18, 2023, 4:13pm

/build/envsetup.sh is still the same since 02h00 UTC

even after :

repo init -u https://gitlab.e.foundation/e/os/android.git -b v1-r
repo sync
repo forall -c 'git lfs pull'
source build/envsetup.sh
lunch lineage_serranoltexx-userdebug
mka eos

i think i need to delete build generated files using a " r m " command…

i will try to to restart building after a make clean

aibd · September 18, 2023, 6:31pm

I have seen the output of envsetup.sh remain unchanged with edits. So this output is only really useful on the first run to check for gross error. You got such an error reported by envsetup.sh, Post #138. So the device.xml is not beyond suspicion but likely OK as builds were completing (oversize).

However I expect the envsetup.sh output to include the “extendrom intention”. Is that still seen ?

Which of the three options did you use to activate and configure extendrom ?
I prefer Option 2

lunch lineage_serranoltexx-user ← is this a sign you are short of sleep ?

eng is suitable as you are “developing” for device seemingly too small for regular /e/OS.