Hi, any success on this issue? If yes, fine. If not, I’d like to share my experience with my XiaomiPoco X3. It is a bit tricky in terms of the handling of the buttons. For me this finally worked:
- Start the Phone in FASTBOOT-Mode, flash the e/OS-Recovery.
- Disconnect USB
- Take 4 deep breath of fresh air, because everything now needs to be done without any hesitation
- Press the Power-Button. IMMEDIATELY, when the Screen turns black:
- Release the Power Button
- Press 1. Volume-UP, 2. Power-Button (this has to be done within 0,5 Seconds after the Sreen went black)
- After about 1,5 or 2 seconds with the two buttons pressed the Vibration-Motor inside the Phone is activated for a split-second. The Screen is still black!
- Now IMMEDIATELY release both buttons. The Screen will remain black for another 3 to 5 seconds. The longer this takes, the higher the chance, that the Phone starts in E/OS Recovery
- May the Luck be with you!