hello,
I try to install the factory img for fairphone 4,but after following this topic
i have the following message error
and my phone don’t want to boot now,somebody have an idea?
Thanks,
Did you follow the instructions in the Error list at the bottom of your screenshot?
i try,but without battery the phone didn’t start,so i plug the battery nad try,but nothing,do you know how to recover the partition frp?
Did you try: take out battery, replace battery, plug phone to pc while holding vol down. Keep holding until Fastboot menu appears?
And did you Terminate that session on terminal, as prompted?
No I don’t know how to recover the partition and I’m not a Fairphoner either, sorry.
yes i try that,but nothing work.in fact the partition metdata are missing.
but i can acess in fastboot,and i send the following command,and it’s works:
fastboot flash bluetooth_a bluetooth.img
fastboot flash bluetooth_b bluetooth.img
fastboot flash devcfg_a devcfg.img
fastboot flash devcfg_b devcfg.img
fastboot flash dsp_a dsp.img
fastboot flash dsp_b dsp.img
fastboot flash modem_a modem.img
fastboot flash modem_b modem.img
fastboot flash xbl_a xbl.img
fastboot flash xbl_b xbl.img
fastboot flash tz_a tz.img
fastboot flash tz_b tz.img
fastboot flash hyp_a hyp.img
fastboot flash hyp_b hyp.img
fastboot flash keymaster_a keymaster.img
fastboot flash keymaster_b keymaster.img
fastboot flash abl_a abl.img
fastboot flash abl_b abl.img
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
fastboot flash recovery_a recovery.img
fastboot flash recovery_b recovery.img
fastboot flash dtbo_a dtbo.img
fastboot flash dtbo_b dtbo.img
fastboot flash vbmeta_system_a vbmeta_system.img
fastboot flash vbmeta_system_b vbmeta_system.img
fastboot flash vbmeta_a vbmeta.img
fastboot flash vbmeta_b vbmeta.img
fastboot flash super super.img
fastboot flash aop_a aop.img
fastboot flash aop_b aop.img
fastboot flash featenabler_a featenabler.img
fastboot flash featenabler_b featenabler.img
fastboot flash imagefv_a imagefv.img
fastboot flash imagefv_b imagefv.img
fastboot flash multiimgoem_a multiimgoem.img
fastboot flash multiimgoem_b multiimgoem.img
fastboot flash qupfw_a qupfw.img
fastboot flash qupfw_b qupfw.img
fastboot flash uefisecapp_a uefisecapp.img
fastboot flash uefisecapp_b uefisecapp.img
fastboot flash xbl_config_a xbl_config.img
fastboot flash xbl_config_b xbl_config.img
fastboot flash core_nhlos_a core_nhlos.img
fastboot flash core_nhlos_b core_nhlos.img
fastboot erase userdata
fastboot erase metadata
fastboot --set-active=a
but this line are in error "fastboot erase metadata" apparently the parition are missing,its due to /e/os?OK, good, you got it working again with /e/ by the looks of it.
I can’t help you more with this; you need one of the forums Fairphone specialists to answer your specific questions/problems I think.
Flashing stock has problems with frp (whatever that is) and flashing /e/ has problems with erasing metadata.
If you want to attract help for this, consider editing your Topic title to be more specific.
Good Luck
1 Like
thanks mate
i will do that.