Samsung galaxy s10 5g - sim network unlock pin

[piero]

https://forum.xda-developers.com/t/recovery-official-3-6-1-x-twrp-for-galaxy-s10-e-5g-exynos.4180287/

@Marine

If you already have the bootloader unlocked you can skip to step 6.

1. Make sure OEM Unlock is ON in developer settings;
2. Turn off the phone;
3. Use vol down + bixby key + usb cable plugged to a pc to start the phone in download mode;
4. Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
   5.** Please be aware all your data will be erased including internal storage and phone will reboot!!**
5. Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
6. Make sure OEM Unlock is ON in developer settings;
7. Turn off the phone;
8. Use vol down + bixby key + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
   10.** If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!**
9. Download appropriate TWRP .tar file according to your device
10. Download avb disabled vbmeta .tar
11. Open Odin v3.14.1 and place the downloaded TWRP .tar file in AP tab, downloaded vbmeta .tar file in CP tab and click Start - once you press start grab the phone and press vol up + bixby + power to force it boot straight in TWRP after flashing

!! Only if coming from full stock firmware

• In TWRP home screen press wipe - format data - yes
• Download and flash multidisabler-samsung-3.* zip to disable security and encryption.

I succeeded using twrp-3.6.0_9-1-beyond0lte.img.tar which is the latest version working with android 11