i see the white bar under the Downloading Symbol growing up and that it was…
now i have to power off my device to go into the recovery mode. but how i can shut down my tab?
if i hold Volume down and Power, the decives is rebooting and the recovery is overwritten by the orginal rom…
the description says, ther blue transfer bar… hhmm there was no blue transfer bar and i don’t know, how i can “Manually reboot into recovery” mode to go on with the installation …
Hi, I do not know the device, is this one with no Home/Bixby button?
This Download Mode SAMSUNG Galaxy Tab S6 Lite, how to - HardReset.info is where I am looking for the answer!
Aim for (1) force stop the device, as soon as the screen turns black make the (2) boot to recovery happen.
yes, i try to watch the viedeo, but i can’t open it. The device has no bixby button, Power + Vol up + Vol down Button are there. I was disapointed because today i see, that my tab is @ /e/ service and Samsung notes as app can be download @ /e/ App Store, thats my most used app on this device… and now, i stuck @ the installation… damn
In the morning, when you are fresh, notice how I said Force stop, and you interpreted this as reboot! Force stop is one thing Reboot is one - two! You must interrupt it.
I am happy you successfully install /e/ without major issue !
On some devices (essentially tablets), volume up and down buttons functions are inverted,
One some devices, you need to hold all the three existing buttons (volume up + volume down + power)
Hi!
I’ve been using for 18 month /e/OS on my Fairphone, bought from /e/Store, and I love it.
I’d like to install it on Galaxy Tab 6 Lite but I’m a bit afraid. I’ve decided to go ahead so I’m reading all I get.
I’ve both Ubunto Mate and Windows 10. I’ve been using almost only Ubunto in the last 2 years but I’m not very confortable yet with command line, just basic.
Should I proceed with Ubunto or Windows? What do you suggest?
Thank you so much
Installing /e/ os on the Tab S6 Lite is not too hard. I think also in addition to immediately change from Volume down to Volume up the USB cable needs to be inserted. So dont give up
I’m using Linux Mint (which is Ubuntu based) and that works fine to install /e/ OS
It is interesting that this generation of devices use the USB cable as part of the trigger! I do not have the device, so can only read, but if I were attempting this I would want to know that I could do all the permutations of changing booting mode before I started flashing anything. You can easily practice your moves on the stock ROM.