Démarrage sur TWRP

Je touche au but, mais…
Après avoir suivi scrupuleusement toutes les étapes, j’arrive à la fin. Je reboote le système après l’installation avec sideload.
Mais mon Redmi Note 8T ne démarre pas /e/, il relance TWRP.

Comment booter sur le système ?
Merci :slight_smile:

Non, pardon, je reviens un peu en arrière. J’ai un formatage failed avec TWRP
Je ne sais pas encore pourquoi ???

bon soir @Cyrille,

ce n’est pas écrit dans la documentation,
mais c’est écrit sur l’écran de l’appareil dans TWRP :
après l’étapes 4,
tu dois revenir en arrière jusqu’ au menu principal, pour choisir de redémarrer, en mode recovery
( avant l’étape 7, car l’install de /e/ doit écrire sur la partition /data ).

  • 4 Now tap Format Data and continue with the formatting process.Here a new screen may show where you will have to type Yes and confirm the action by clicking a button.

Caution: Format Data will remove encryption as well as delete all files stored on the internal storage. Remember to take a backup first. Check Requirements section above.

  • 5.Return to the previous menu and tap Advanced Wipe.
  • 6.Select the Cache and System partitions to be wiped and then Swipe to Wipe
  • 7.Sideload the /e/ .zip package.

Tip: Sideload requires actions in two places to be done. One on your phone in the TWRP UI and secondly on the connected PC which should have adb enabled. Also note the sideload process while running may stop abruptly around 50%. The console would show a message Total xfer: 1.00x. This would mean that the transfer has successfully completed.

  • 8.On the device in TWRP,
    select Advanced, ADB Sideload, then swipe to begin sideload.

  • On the host machine, in the console , start the sideload of the package by typing

adb sideload filename.zip

Tip: Change the filename to the name of the file you downloaded

  • 8.Once installation has finished, return to the main menu, tap Reboot, and then System

Le problème est que l’étape 4 ne fonctionne pas dans TWRP.
J’ai un message en haut de l’écran Data Format Complete : Failed :frowning:

Merci pour votre aide :slight_smile:

Dans l’écran TWRP “Wipe”, as-tu un bouton “Repair or change File System” ?
Si oui, tu peux essayer de réparer Data, ou de changer vers un autre système puis de revenir à celui d’origine (ex. Ext4 -> Ext2 -> Ext4).

j’ai essayé : changer le format de Data en Ext 2,3,4 et repair Data.
Dans j’ai le même message Format Complete : Failed Operation not permitted

On dirait que je n’ai pas les droits. Est-ce une histoire de Root ?

Bon, Data est formaté. J’ai joué avec enable/disable MTP dans Mount.
Je vais continuer… A suivre

La suite, c’est bien passée :slightly_smiling_face:
!

Cool :grin:

3 Likes