Display garbled on powering on after powering down to remove SIM2

[AnotherElk]

@swarfendor437

Havenct taken phone apart to check connections.

Sometimes this nonintrusive part here from the linked topic could just do the trick …

Screen shows random noise ~ snow (after fall)

Make sure not to leave out iFixit’s Step 9 advice: To reinstall the display-module press it into place on all sides until you can hear a snap from the plastic clamps to make sure it sits flush with the frame. From my own experience, this is necessary – the screws are important, but somehow they won’t automatically make the plastic clamps snap into place.

(I’m repeating it here to increase the chances for affected users to see it.)