[UNOFFICIAL BUILDS] Samsung Galaxy Tab S3 LTE (gts3llte, SM-T825)] / Samsung Galaxy Tab S3 WiFi (gts3lwifi, SM-T820)] for eOS R

Hi guys,

I made builds for Samsung Galaxy Tab S3 LTE (gts3llte, SM-T825)] / Samsung Galaxy Tab S3 WiFi (gts3lwifi, SM-T820)] for eOS R-1.15
Please see sources and install instructions including recovery here:

https://forum.xda-developers.com/t/rom-unofficial-11-eas-signature-spoofing-ota-sm-t820-sm-t825-2023-08-01-lineageos-18-1-for-galaxy-tab-s3.4293069/

Galaxy Tab S3 LTE (gts3llte, SM-T825)]
https://www.androidfilehost.com/?fid=10620683726822076705

Galaxy Tab S3 WiFi (gts3lwifi, SM-T820)]
https://www.androidfilehost.com/?fid=10620683726822076659

I do not own the devices, so anyone who is brave enough can test the builds. As far as I know there are no Samsung Galaxy Tab S3 builds for e yet. So you can be the first :slight_smile:

Use it at you own risk!
Please support the developer(s)!

1 Like

I’ve been using the Tab S3 ROMs from @Awesometic for quite some time. Now will try your builds, @ronnz98. Thanks :clap:

Samsung Galaxy Tab S3 9.7 (2017)

Vendor Name: Samsung
Device name: SM-T820 (Wi-Fi)
Device CodeName: gts28vewifi
Version of Stock android 9-Pie - T820XXU3CTD5
Version of /e/OS: e-1.15-r-20230904-UNOFFICIAL-gts3lwifi by @ronnz98
Version of Custom Recovery: TWRP-twrp-3.6.2_9-0-gts28vewifi by @Awesometic
The device is Not rooted

My first clean fresh installation via adb sideload was aborted by TWRP with the error message:

Patching system image unconditionally…
Updater prozess ended with signal: 7

The second clean fresh installation via TWRP > Install *.zip on the other hand booted immediately and the device could be set up :+1:

A detailed review like this one will soon be available for the Tab S3 SM-T820 and SM-T825.

Samsung Galaxy Tab S3 9.7 (2017)

Vendor Name: Samsung
Device name: SM-T825 (LTE)
Device CodeName: gts28vewifi
Version of Stock android 9-Pie - T820XXU3CFD1
Version of /e/OS: e-1.15-r-20230904-UNOFFICIAL-gts3llte by @ronnz98
Version of Custom Recovery: TWRP-twrp-3.6.2_9-0 gts3llte by @Awesometic
The device is Not rooted


:white_check_mark: 4G | LTE
:white_check_mark: Wi-Fi WLAN
:white_check_mark: USB OTG
:white_check_mark: OTG USB-C Stick
:white_check_mark: OTG USB-A Stick via OTG-USB Adapter
:white_check_mark: wired LAN via OTG adapter RJ45
:white_check_mark: OTG USB-C headset
:white_check_mark: 3,5mm jack headset
:white_check_mark: GPS
:white_check_mark: Compass
:white_check_mark: e-Cameras
:white_check_mark: Secure Camera (GrapheneOS) + QR-Scan
:white_check_mark: Bluetooth Sound box
:white_check_mark: Samsung Book cover keyboard via Bluetooth
:white_check_mark: Samsung S-Pen
:white_check_mark: my SmartHome applications work properly
:white_check_mark: microSDXC 128GB works as internal memory expansion (32 GB +128 GB = 160 GB) and as mobile memory 128 GB.
:x: standard USB-C headset - no sound

Thank you @Awesometic for source code. Thank you @ronnz98 for building /e/OS ROM.

1 Like

I do have 2 × Galaxy Tab S3 LTE (gts3llte, SM-T825), but with bad USB ports…
Will try soon, too.

You can use the SD card and store the ROM and respective TWRP for S3 and the install in TWRP recovery

It’s the charging, which is almost impossible.

I understand. Did you try to use a cleaning agent (spray or with air pressure) on the USB port?