Thank you for the new build.
Unfortunately this installs completely (no adb errors) but it does not start (It reboots continuously unless I do not use the recovery showing 2.7 btw or fastboot). I have tried multiple times and now downgraded to your previous one (the one with the audio problem). I have also tried to change slot, with the same result.
Versions e-2.6.3-t-20241230 + e-2.7-t-20241229 I could not reinstall despite several times. A manual update via adb sideload also leads to a non-bootable system (bootloop)
payload.bin of version e-2.6-t-20241213 contains four files: boot.img, system.img, vendor.img and super_empty.img
payload.bin of versions e-2.6.3-t-20241230 + e-2.7-t-20241229 contain only three files each: boot.img, system.img, vendor.img - but not super_empty.img
I’ve freshly set up from scratch my Mi A2 (jasmine_sprout), which means installing stock firmware: V9.6.17.0.ODIMIFE_8.1 | V10.0.17.0.PDIMIXM_9.0 | V11.0.28.0.QDIMIXM_10.0
and then successfully installed and set up e-2.6-t-20241213-UNOFFICIAL-jasmine_sprout by @ronnz98
Manuell update to e-2.8-t-20250222-UNOFFICIAL-jasmine_sprout test-keys by @ronnz98 was successfully performed via Local update
Note: payload.bin of version e-2.8-t-20250222 contain three files each: boot.img, system.img, vendor.img
2nd Xiaomi Mi A2 (jasmine_sprout) - clean install
Clean install of e-2.8-t-20250222-UNOFFICIAL-jasmine_sprout test-keys by @ronnz98 was successfully performed via fastboot flash boot boot.img (= e-recovery) + adb sideload *ROM.zip