- Vendor Name: Samsung
- Device name: S7 Edge
- Device CodeName: hero2lte
- Version of /e/OS: 1.14, dev
- The device is Not rooted
Working very well, thanks…
Installed on Samsung S10e, Samsung Tab S6 lite and Sony Z5 compact. All good.
Installed stable upgrade OTA on Samsung S9.
Only two things to mention:
- In Settings → System the entry for Backup/Seedvault is missing. So I can’t setup device backup.
- Got a second version offered after upgrade, installed without problem.
Xiaomi
Mi A2
jasmine sprout
1.14 r dev
Not rooted
many thanks flawless update again 
- Vendor Name: Fairphone
- Device name: Fairphone 4
- Device CodeName: FP4
- Version of /e/OS or Stock which existed previously: /e/OS 1.14-s-stable
- Not rooted
All fine, thanks to the team
I’m currently upgrading my S9 from 1.14, but i noticed there were two different 1.15 releases published a day apart (see Screenshot).
Would anyone care to explain?
Edit: is the newer one a hotfix? Some explanation in the UI would be nice in such a case since it’s impossible to tell them apart in the updater other than from the publish date.
Had you gost touch issues before the update?
In that case, new stock firmware could be responsible. Gost touches would be solved but less display reactivity.
I didn’t have that issue before, now I don’t have less reactivity.
If I understand the Fairphone forum, that is an issue software and hardware too. Fairphone support in the last case told to return the phone.
Here is the discussion: https://forum.fairphone.com/t/ghost-inputs-on-fp4/82837
I updated to the newer of the two offered, from 1.14-q, on my s9. After upgrade finished device showed 1.15-r installed and seems to be working fine so far.
Device not rooted.
OTA without any problems.
Thank you!
Ah nice thanks for fixing Bluetooth audio on FP4👍
Try fastboot set active a
- Vendor Name: Fairphone
- Device name: Fairphone 4
- Device CodeName: FP4
- Version of /e/OS or Stock which existed previously: /e/OS 1.14-s-stable
- Not rooted
Everything’s good.
Needed to clear cache and data from Magic earth.
BT HD audio codec is fixed and works again! Thank you for the development!
Vendor Name: Fairphone
Device name: Fairphone 3
Device CodeName: FP3
Version of /e/OS or Stock which existed previously: /e/OS 1.14-s-20230819321663-dev-FP3
Is the device Rooted / Not rooted: Not rooted
No issue with updating, now on 1.15-s-20230916331435-dev-FP3.
The following things work for me:
- Call / be called
- Send SMS / receive SMS
- Notification LED
- Alarm
- Internet via Wi-Fi
- Internet via mobile network
- Wi-Fi hotspot
- Location
- Settings - System - microG - Self-Check: all ok, including location permissions
- Settings - System - microG - Location - Wi-Fi location - Request from Mozilla: enabled
- Settings - System - microG - Location - Wi-Fi location - Request from Hotspot: enabled
- Settings - System - microG - Location - Wi-Fi location - Remember from GPS: enabled
- Settings - System - microG - Location - Mobile network location - Request from Mozilla: enabled
- Settings - System - microG - Location - Mobile network location - Remember from GPS: enabled
- Settings - Advanced Privacy - Location: Exposed
- Settings - Advanced Privacy - Manage my location: Use my real location
- Settings - Location - Location Services - Wi-Fi scanning: enabled
- Settings - Location - Location Services - Bluetooth scanning: disabled
- Settings - Location - App location permissions - “Allowed only while in use”: Apps are listed
- Compass
- Screenshot
- Main camera (original FP3 Camera module, not +) photo + video
- Selfie camera (original FP3 Top module, not +) photo + video
- USB connection to PC / MTP
- MyPhoneExplorer 2.0
(nightly 27.01.2023 - for sync with Betterbird instead of Thunderbird) - Bluetooth (music playback, data connection)
2 Likes
Vendor Name: Fairphone
Device name: Fairphone 2
Device CodeName: FP2
Version of /e/OS or Stock which existed previously: /e/OS 1.14-r-20230817321316-dev-FP2
Is the device Rooted / Not rooted: Not rooted
No issue with updating, now on 1.15-r-20230915331434-dev-FP2.
The following things work for me:
- Call / be called
- Send SMS / receive SMS
- Alarm
- Internet via Wi-Fi
- Internet via mobile network
- Wi-Fi hotspot
- Location
- Settings - System - Advanced - microG - Self-Check: all ok, including location permissions
- Settings - System - Advanced - microG - Location - Wi-Fi location - Request from Mozilla: enabled
- Settings - System - Advanced - microG - Location - Wi-Fi location - Request from Hotspot: enabled
- Settings - System - Advanced - microG - Location - Wi-Fi location - Remember from GPS: enabled
- Settings - System - Advanced - microG - Location - Mobile network location - Request from Mozilla: enabled
- Settings - System - Advanced - microG - Location - Mobile network location - Remember from GPS: enabled
- Settings - Advanced Privacy - Location: Exposed
- Settings - Advanced Privacy - Manage my location: Use my real location
- Settings - Location - Wi-Fi and Bluetooth scanning - Wi-Fi scanning: enabled
- Settings - Location - Wi-Fi and Bluetooth scanning - Bluetooth scanning: disabled
- Settings - Location - App access to location - “Allowed only while in use”: Apps are listed
- Compass
- Screenshot
- Main camera (Camera module 12 MP version 2) photo + video
- Selfie camera (Top module version 2) photo + video
(Camera records completely black video from the moment surrounding light is too dark or changes into too dark when moving … years old issue I already had with Open Camera on LineageOS, can live with it.) - USB connection to PC / MTP
- MyPhoneExplorer 2.0
(nightly 27.01.2023 - for sync with Betterbird instead of Thunderbird) - Bluetooth (music playback, data connection)
1 Like
Is T roll-out still in progress? I still don’t see a T build for XZ2c.
1 Like
That’s what I did. Unfortunately AFTER I had tried to install v1.15 again via sideload, for what I had to unlock the bootloader.
T has arrived! Just got it installed on a spare Poco F1
It works smoothly, like S.
The only issue I recognised so far, is the notification in App Lounge (as noted here: Feedback for v1.15 - #7 by ralxx - from user perspective I’d prefer it refreshing automatically without notification).
Otherwise: 1000 thanks to the team!!!
Vendor Name: Xiaomi
Device name: Pocophone F1
Device CodeName: Beryllium
Version of /e/OS: v1.15-T-dev
Version of /e/OS existed previously: none (fresh install)
Samsung
Galaxy S9
Starlte
Previously eos q V1.14 stable
Non rooted
I just installed r v1.15 stable OTA
The installation went just fine thanks a lot for the great work and the convenience of keeping my data!
Unfortunately media storage is draining the battery withing three hours, which lasted more than a day before the installation
I saw this issue in other threads but they were all closed claiming this would be fixed in the new update.
I hope this helps!
Cheers
