Hello,
I will try but
FP4 or one ? 
EDIT: It worked. Thanks @piero
I will wait for new release. Until then, I will use mobile data carefully. Do you have in mind any ETA ?
Thanks
e-2.0 is announced for the end of April
.
I think i understand the problem you faced : an “anti-roll-back feature” that prevent to exploit old vulnerabilities that have been now corrected…
Just upgraded my Teracube 2e (emerald) to 1.21 and so far, so good. One thing that made me raise an eyebrow, though, is the new VoLTE icon on the status bar. The dialer has always let me know in-call when VoLTE or VoWIFI is being used, so having this new icon taking up space in the status bar seems rather superfluous.
Is there a way to disable it? Settings > System > Status Bar > System icons seems to let me toggle off everything but that.
1 Like
Vendor Name: Fairphone
Device name: FP4
Device CodeName: FP4
Previous Version of /e/OS: 1.20-s (stable)
Rooted: No
Happy Eastern.
The OTA Update is working in ~30minutes incl. reboot.
Everything is running without any problems so far.
The “Spotify” control with Bluetooth devices now also works reliably.
@eOS-Team: Thank you very much for your work
BR
Mark
Hello,
The wifi of my Murena One phone is not working after upgrading to 1.21.1-s-20240326389527-stable-one. Is this a known problem? Do you have any advice to fix the issue?
Best regards
Regain your privacy! Adopt /e/OS the deGoogled mobile OS and online services
- Fairphone
- Fairphone 3+
- Previously: /e/OS 1.20 stable
- Updated via OTA
- Not rooted
Issue with SD card after update to 1.21. Cannot read SD card anymore, offers to format. Can recover data from SD card via PC, so the SD card is not the issue.
EDIT: Resolved issue by
- Turning phone off
- Removing SD card
- Inserting new (blank) SD card
- Starting phone
- Verifying that the new SD card is accessible
- Turning phone off
- Re-inserting original SD card
- Starting phone
Not all of these steps may be necessary, but that’s what worked for me
4 Likes
Vendor Name: Lenovo
Device Name: Yoga Tab 3 Plus Wi-Fi
Device CodeName: YTX703F
Version of /e/OS previously: 1.20-R
Rooted
Update OK, no issue. 
Vendor Name: Fairphone
Device name: Fairphone 4
Device CodeName: FP4
Previous Version of /e/OS: 1.20-s (stable)
Rooted: No
I updated to 1.21.1. I have issue with status bar (right upper).
I have two sim cards. Before I had two “triangle” icons int the status bar. Now I have a phone icon and a “triangle” icon. When I enable my mobile data option. All icons in the status bar disappear. It blanks.
Can you check it ? It seems that some people here have same problems with icons in the status bar for FairPhone4.
Thanks.
Note: I must check if I can use 5G because with the new update, the 4G is used.
Hi,
- Vendor Name : Xiaomi
- Device name : Mi 11 Lite 5G NE
- Device CodeName : Lisa
- Updated from 1.20
- Not rooted.
Everything seems to work as expected since 24h. Thanks to the team !
- Vendor Name : Xiaomi
- Device name : Redmi note 9s
- Device CodeName : miatoll
- Updated from 1.20-t
- Not rooted.
Works fine , thx
Hello, I just update my Moto G5 and after installation and reset, I have the same problem: a few seconds later after turn on, Wifi turn off…It’s impossible to have the Icon Wifi…and connection.
The update is 1.21-r-20240323388943-dev-cedric.
An idea for solution?
1 Like
Murena Fairphone 5, updated from 1.20, not rooted.
Control center is a bit buggy displaying the status bar.
- Vendor Name : Samsung
- Device name : S9+
- Device CodeName : SM-G965F
- Version of /e/OS or Stock which existed previously : 1.20
- Not rooted
It works fine 
Same issue for me. Same smartphone. WiFi and Bluetooth are disabled a few seconds after manually enabled.
Vendor Name: Murena
Device Name: MurenaOne
Device CodeName: ?
Version of /e/OS previously: 1.20 ?
Rooted: No
Identical update from Murena One 1.20. to 1.21.1-s-20240326389527-stable-one. And Wifi and Bluetooth cannot be switched on.
I then reset to factory settings, but no change.
And it feels like half the status bar is missing (no SIM inserted).
1 Like
Vendor Name: Fairphone
Device name: Fairphone 5
Device CodeName: FP5
Previous Version: Fairphone OS
Rooted: No
Brand new Fairphone 5 with Fairphone OS on IMG-e-1.21-t-20240323388918-stable.
Worked very well. Has been running smoothly for a day.
Thanks for the good work. 
Thanks for letting me know @piero. I have been able to “adb sideload” previous version and wifi works again.
1 Like
Vendor name: google
Device name: pixel 5
Device CodeName:
Previous Version of /e/OS: v1.20.0
Rooted: no
The app “Signal” is now unable to take pictures from within the app. It says " no camera".
This was no issue under the previouse version ans there was no Signal update during that time.
i don’t know why @jcollado have success restoring e-1.20 on a murena one device when @lonclegr not.
Perhaps because he use adb sideload method against internal storage method ?
Edit : because he format /data…
Vendor Name: Fairphone
Device name: Fairphone 3
Device CodeName: FP3
Version of /e/OS or Stock which existed previously: /e/OS 1.20-t-20240222382228-dev-FP3
Is the device Rooted / Not rooted: Not rooted
No issue with updating, now on 1.21-t-20240324389105-dev-FP3.
The following things work for me:
- Call / be called
- Send SMS / receive SMS
- Notification LED
- Alarm
- Internet via Wi-Fi
- Internet via mobile network
- Wi-Fi hotspot
- Location
- Settings - System - microG - Self-Check: all ok, including location permissions
- Settings - System - microG - Location - Wi-Fi location - Request from Mozilla: enabled
- Settings - System - microG - Location - Wi-Fi location - Request from Hotspot: enabled
- Settings - System - microG - Location - Wi-Fi location - Remember from GPS: enabled
- Settings - System - microG - Location - Mobile network location - Request from Mozilla: enabled
- Settings - System - microG - Location - Mobile network location - Remember from GPS: enabled
- Settings - Advanced Privacy - Location: Exposed
- Settings - Advanced Privacy - Manage my location: Use my real location
- Settings - Location - Location Services - Wi-Fi scanning: enabled
- Settings - Location - Location Services - Bluetooth scanning: disabled
- Settings - Location - App location permissions - “Allowed only while in use”: Apps are listed
- Compass
- Screenshot
- Main camera (original FP3 Camera module, not +) photo + video
- Selfie camera (original FP3 Top module, not +) photo + video
- USB connection to PC / MTP
- MyPhoneExplorer 2.1
- Bluetooth (music playback, data connection)