If the device is working as you say … it is probably ok.
What could we do? Check with the log against the partitions on that phone which are required to be flashed to see whether any were any omitted.
- This is how to find the log on Windows
2. flash_FP4_factory.sh
#!/usr/bin/env bash
##########
# This script is created and maintained by
# Bharath(@teamb58).org
# Feel free to connect for any queries or suggestions.
##########
##########
# This script flashes a software release and complete wipes the device.
#
##########
set -e
set -u
# Target device info
PRODUCT="Fairphone 4"
PRODUCT_ID="FP4"
# Paths/files
ROOT_DIR="$( cd -- "$( dirname -- "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )"
IMAGES_DIR="${ROOT_DIR}"
# Abort the script (and wait for a key to be pressed).
abort_now() {
echo ""
read -rp "ERROR: Aborting now (press Enter to terminate)." a
exit 1
}
# Check for connected phone
find_device() {
echo "INFO: Looking for connected device(s)..."
DEVICE_FOUND="false"
while [ ${DEVICE_FOUND} = "false" ]
do
serial_numbers=
for sn in $("${FASTBOOT_BIN}" devices | grep fastboot | grep -oE '^[[:alnum:]]+')
do
# Checking the product ID
PRODUCT_STRING=$("${FASTBOOT_BIN}" -s "${sn}" getvar product 2>&1)
# Add serial, if product matches
if [[ ${PRODUCT_STRING} == *"${PRODUCT_ID}"* ]] || [[ ${PRODUCT_STRING} == *"${PRODUCT_ID_OLD}"* ]]
then
serial_numbers="${serial_numbers} $sn"
fi
done
case $(echo "${serial_numbers}" | wc -w | grep -oE '[0-9]+') in
0)
echo ""
echo "WARNING: No ${PRODUCT} found in fastboot mode."
echo "WARNING: Make sure that a ${PRODUCT} is connected."
;;
1)
echo "INFO: One ${PRODUCT} in fastboot mode found (serial number: ${sn})."
DEVICE_FOUND="true"
break
;;
*)
echo ""
echo "WARNING: Several ${PRODUCT}'s in fastboot mode connected."
echo "WARNING: Please connect only one ${PRODUCT}."
;;
esac
echo ""
while true
do
read -rp "Do you want to look for a ${PRODUCT} again? [(Y)es/(n)o]: " a
if [ -z "${a}" ] || [ "${a}" = 'y' ] || [ "${a}" = 'Y' ]
then
break
elif [ "${a}" = 'n' ] || [ "${a}" = 'N' ]
then
exit 0
fi
done
done
}
# Flash (or manipulate) relevant partitions
flash_device() {
flash_image_ab_or_abort "${sn}" bluetooth "${IMAGES_DIR}/bluetooth.img"
flash_image_ab_or_abort "${sn}" devcfg "${IMAGES_DIR}/devcfg.img"
flash_image_ab_or_abort "${sn}" dsp "${IMAGES_DIR}/dsp.img"
flash_image_ab_or_abort "${sn}" modem "${IMAGES_DIR}/modem.img"
flash_image_ab_or_abort "${sn}" xbl "${IMAGES_DIR}/xbl.img"
flash_image_ab_or_abort "${sn}" tz "${IMAGES_DIR}/tz.img"
flash_image_ab_or_abort "${sn}" hyp "${IMAGES_DIR}/hyp.img"
flash_image_ab_or_abort "${sn}" keymaster "${IMAGES_DIR}/keymaster.img"
flash_image_ab_or_abort "${sn}" abl "${IMAGES_DIR}/abl.img"
flash_image_ab_or_abort "${sn}" boot "${IMAGES_DIR}/boot.img"
flash_image_ab_or_abort "${sn}" recovery "${IMAGES_DIR}/recovery.img"
flash_image_ab_or_abort "${sn}" dtbo "${IMAGES_DIR}/dtbo.img"
flash_image_ab_or_abort "${sn}" vbmeta_system "${IMAGES_DIR}/vbmeta_system.img"
flash_image_ab_or_abort "${sn}" vbmeta "${IMAGES_DIR}/vbmeta.img"
flash_image_or_abort "${sn}" super "${IMAGES_DIR}/super.img"
flash_image_ab_or_abort "${sn}" aop "${IMAGES_DIR}/aop.img"
flash_image_ab_or_abort "${sn}" featenabler "${IMAGES_DIR}/featenabler.img"
flash_image_ab_or_abort "${sn}" imagefv "${IMAGES_DIR}/imagefv.img"
flash_image_ab_or_abort "${sn}" multiimgoem "${IMAGES_DIR}/multiimgoem.img"
flash_image_ab_or_abort "${sn}" qupfw "${IMAGES_DIR}/qupfw.img"
flash_image_ab_or_abort "${sn}" uefisecapp "${IMAGES_DIR}/uefisecapp.img"
flash_image_ab_or_abort "${sn}" xbl_config "${IMAGES_DIR}/xbl_config.img"
flash_image_ab_or_abort "${sn}" core_nhlos "${IMAGES_DIR}/core_nhlos.img"
"$FASTBOOT_BIN" -s "${sn}" erase userdata
"$FASTBOOT_BIN" -s "${sn}" erase metadata
"$FASTBOOT_BIN" -s "${sn}" --set-active=a
}
# Flash an image to a partition. Abort on failure.
# Arguments: <device serial number> <partition name> <image file>
flash_image_or_abort() {
local retval=0
"$FASTBOOT_BIN" -s "${1}" flash "${2}" "${3}" || retval=$?
if [ "${retval}" -ne 0 ]
then
echo ""
echo "ERROR: Could not flash the ${2} partition on device ${1}."
echo ""
echo "ERROR: Please unplug the phone, take the battery out, boot the device into"
echo "ERROR: fastboot mode, and start this script again."
echo "ERROR: (To get to fastboot mode, press Volume-Down and plug in the USB-C)"
echo "ERROR: (cable until the fastboot menu appears.)"
abort_now
fi
}
# Flash an image to both A and B slot of partition. Abort on failure.
# Arguments: <device serial number> <partition name without slot> <image file>
flash_image_ab_or_abort() {
flash_image_or_abort "${1}" "${2}_a" "${3}"
flash_image_or_abort "${1}" "${2}_b" "${3}"
}
# Operating system checks and variable definition
os_checks() {
case "$(uname -s 2> /dev/null)" in
Linux|GNU/Linux)
echo "INFO: You are using a Linux distribution."
FASTBOOT_BIN="${ROOT_DIR}/bin-linux-x86/fastboot"
;;
msys|MINGW*)
echo "INFO: You are using MinGW on Windows"
FASTBOOT_BIN="${ROOT_DIR}/bin-msys/fastboot.exe"
;;
*)
echo "ERROR: Unsupported operating system (${OSTYPE})."
echo "ERROR: Only GNU/Linux, and MinGW on Windows are currently supported."
abort_now
;;
esac
}
# Control the reboot sequence
reboot_device() {
echo "-----------"
echo ""
echo "INFO: Done. The device will reboot now."
"${FASTBOOT_BIN}" -s "${sn}" reboot
echo ""
echo "INFO: You can unplug the USB cable now."
echo ""
}
echo ""
echo "*** ${PRODUCT} flashing script ***"
echo ""
echo "INFO: The procedure will start soon. Please wait..."
echo "Note that this will detect and flash only on FP4 device."
sleep 2
# Begin with some OS checks and variable definition
os_checks
# Call function to look for device(s)
# If only one device is found $sn will store its serial number
find_device
# Flash the device
flash_device
# Reboot device
reboot_device
3. flash_device, partition list + flashing tasks
flash_device() {
flash_image_ab_or_abort "${sn}" bluetooth "${IMAGES_DIR}/bluetooth.img"
flash_image_ab_or_abort "${sn}" devcfg "${IMAGES_DIR}/devcfg.img"
flash_image_ab_or_abort "${sn}" dsp "${IMAGES_DIR}/dsp.img"
flash_image_ab_or_abort "${sn}" modem "${IMAGES_DIR}/modem.img"
flash_image_ab_or_abort "${sn}" xbl "${IMAGES_DIR}/xbl.img"
flash_image_ab_or_abort "${sn}" tz "${IMAGES_DIR}/tz.img"
flash_image_ab_or_abort "${sn}" hyp "${IMAGES_DIR}/hyp.img"
flash_image_ab_or_abort "${sn}" keymaster "${IMAGES_DIR}/keymaster.img"
flash_image_ab_or_abort "${sn}" abl "${IMAGES_DIR}/abl.img"
flash_image_ab_or_abort "${sn}" boot "${IMAGES_DIR}/boot.img"
flash_image_ab_or_abort "${sn}" recovery "${IMAGES_DIR}/recovery.img"
flash_image_ab_or_abort "${sn}" dtbo "${IMAGES_DIR}/dtbo.img"
flash_image_ab_or_abort "${sn}" vbmeta_system "${IMAGES_DIR}/vbmeta_system.img"
flash_image_ab_or_abort "${sn}" vbmeta "${IMAGES_DIR}/vbmeta.img"
flash_image_or_abort "${sn}" super "${IMAGES_DIR}/super.img"
flash_image_ab_or_abort "${sn}" aop "${IMAGES_DIR}/aop.img"
flash_image_ab_or_abort "${sn}" featenabler "${IMAGES_DIR}/featenabler.img"
flash_image_ab_or_abort "${sn}" imagefv "${IMAGES_DIR}/imagefv.img"
flash_image_ab_or_abort "${sn}" multiimgoem "${IMAGES_DIR}/multiimgoem.img"
flash_image_ab_or_abort "${sn}" qupfw "${IMAGES_DIR}/qupfw.img"
flash_image_ab_or_abort "${sn}" uefisecapp "${IMAGES_DIR}/uefisecapp.img"
flash_image_ab_or_abort "${sn}" xbl_config "${IMAGES_DIR}/xbl_config.img"
flash_image_ab_or_abort "${sn}" core_nhlos "${IMAGES_DIR}/core_nhlos.img"
"$FASTBOOT_BIN" -s "${sn}" erase userdata
"$FASTBOOT_BIN" -s "${sn}" erase metadata
"$FASTBOOT_BIN" -s "${sn}" --set-active=a
If you can provide the full text based log from 1. I (or you) can check it against 3. the partition list and flashing tasks.