Looking for some BUILDERS to teach / guide me

[piero]

…oh !!!

because the list is discontinued on several lines, i hadn’t…!!!

now really buildding …

depmod: WARNING: could not open modules.order at /home/antec/android/lineage/out/target/product/gts4lv/obj/PACKAGING/depmod_vendor_intermediates/lib/modules/0.0: No 
such file or directory
depmod: WARNING: could not open modules.builtin at /home/antec/android/lineage/out/target/product/gts4lv/obj/PACKAGING/depmod_vendor_intermediates/lib/modules/0.0: N
o such file or directory

2023-09-11 06:33:09 - add_img_to_target_files.py - INFO    : done.
[ 99% 60789/60790] Package OTA: out/target/product/gts4lv/lineage_gts4lv-ota-eng.antec.zip
2023-09-11 06:34:05 - common.py - WARNING : Failed to read SYSTEM/etc/build.prop
2023-09-11 06:34:05 - common.py - WARNING : Failed to read VENDOR/etc/build.prop
2023-09-11 06:34:05 - common.py - WARNING : Failed to read PRODUCT/etc/build.prop
2023-09-11 06:34:05 - common.py - WARNING : Failed to read PRODUCT/build.prop
2023-09-11 06:34:05 - common.py - WARNING : Failed to read SYSTEM_EXT/etc/build.prop
2023-09-11 06:34:05 - common.py - WARNING : Failed to read SYSTEM_EXT/build.prop
2023-09-11 06:34:05 - common.py - WARNING : Failed to read ODM/etc/build.prop
2023-09-11 06:34:05 - common.py - WARNING : Failed to read ODM/build.prop
2023-09-11 06:34:05 - ota_from_target_files.py - INFO    : --- target info ---

[100% 60790/60790] build bacon
Package Complete: out/target/product/gts4lv/lineage-18.1-20230910-UNOFFICIAL-gts4lv.zip

build completed successfully (05:26:23 (hh:mm:ss))

.

where is the log ?

exploring /out folder :
build_error is empty
there is no recent error.log

[ronnz98]

Can you type this into your terminal please:

sudo apt-get install bc bison build-essential ccache curl flex gcc-multilib gcc-multilib git git-lfs gnupg gperf imagemagick lib32ncurses-dev lib32readline-dev lib32z1-dev libelf-dev liblz4-tool libncurses5 libncurses5-dev libsdl1.2-dev libssl-dev libxml2 libxml2-utils lzop pngcrush rsync schedtool squashfs-tools xsltproc zip zlib1g-dev

[piero]

antec@antec-p6-2038fr:~/android/lineage$ sudo apt-get install bc bison build-essential ccache curl flex gcc-multilib gcc-multilib git git-lfs gnupg gperf imagemagick lib32ncurses-dev lib32readline-dev lib32z1-dev libelf-dev liblz4-tool libncurses5 libncurses5-dev libsdl1.2-dev libssl-dev libxml2 libxml2-utils lzop pngcrush rsync schedtool squashfs-tools xsltproc zip zlib1g-dev
[sudo] Mot de passe de antec : 
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
bc est déjà la version la plus récente (1.07.1-2build1).
bison est déjà la version la plus récente (2:3.5.1+dfsg-1).
ccache est déjà la version la plus récente (3.7.7-1).
flex est déjà la version la plus récente (2.6.4-6.2).
gcc-multilib est déjà la version la plus récente (4:9.3.0-1ubuntu2).
lib32readline-dev est déjà la version la plus récente (8.0-4).
zip est déjà la version la plus récente (3.0-11build1).
gperf est déjà la version la plus récente (3.1-1build1).
libsdl1.2-dev est déjà la version la plus récente (1.2.15+dfsg2-5).
lzop est déjà la version la plus récente (1.04-1).
pngcrush est déjà la version la plus récente (1.8.13-0.1).
schedtool est déjà la version la plus récente (1.3.0-3).
build-essential est déjà la version la plus récente (12.8ubuntu1.1).
curl est déjà la version la plus récente (7.68.0-1ubuntu2.19).
git est déjà la version la plus récente (1:2.25.1-1ubuntu3.11).
gnupg est déjà la version la plus récente (2.2.19-3ubuntu2.2).
lib32ncurses-dev est déjà la version la plus récente (6.2-0ubuntu2.1).
lib32z1-dev est déjà la version la plus récente (1:1.2.11.dfsg-2ubuntu1.5).
libelf-dev est déjà la version la plus récente (0.176-1.1ubuntu0.1).
libncurses5-dev est déjà la version la plus récente (6.2-0ubuntu2.1).
libssl-dev est déjà la version la plus récente (1.1.1f-1ubuntu2.19).
libxml2 est déjà la version la plus récente (2.9.10+dfsg-5ubuntu0.20.04.6).
libxml2-utils est déjà la version la plus récente (2.9.10+dfsg-5ubuntu0.20.04.6).
rsync est déjà la version la plus récente (3.1.3-8ubuntu0.5).
squashfs-tools est déjà la version la plus récente (1:4.4-1ubuntu0.3).
xsltproc est déjà la version la plus récente (1.1.34-4ubuntu0.20.04.1).
zlib1g-dev est déjà la version la plus récente (1:1.2.11.dfsg-2ubuntu1.5).
imagemagick est déjà la version la plus récente (8:6.9.10.23+dfsg-2.1ubuntu11.9).
liblz4-tool est déjà la version la plus récente (1.9.2-2ubuntu0.20.04.1).
libncurses5 est déjà la version la plus récente (6.2-0ubuntu2.1).
git-lfs est déjà la version la plus récente (3.4.0).
0 mis à jour, 0 nouvellement installés, 0 à enlever et 1 non mis à jour.
antec@antec-p6-2038fr:~/android/lineage$ 

.

---

.
[100% 60790/60790] build bacon
Package Complete: out/target/product/gts4lv/lineage-18.1-20230910-UNOFFICIAL-gts4lv.zip

build completed successfully (05:26:23 (hh:mm:ss))

where is the log ?

exploring /out folder :
build_error is empty
there is no recent error.log
where is the recovery ? i see one, but not named lineage-recovery-gts4lv
.

have a go now with building /e/ for the same device…

do i need to clean something ?

[ronnz98]

Congratulations

Regard /e/OS build you can create a new folder with the /e/OS source and follow the instructions I posted. It is very similar

[piero]

@ronnz98

Congratulations

i did nothing, only apt install, and run breakfast and brunch…

@piero

do i need to clean something ?

@ronnz98

Regard /e/OS build you can create a new folder with the /e/OS

so i will delete the /lineageos folder because it take 237Gb and let me only 213Gb free on my ~500Gb dedicated Hard Drive,
thanks.

[aibd]

Starting at “you might clean your environment with …”

Installing /e/ on galaxy tab S2 Wifi

This was your starting point – Are we ok with that ? Are you confident that environment is ok ? And / or are you using https://gitlab.e.foundation/steadfasterX/android_vendor_e ? Save all your manifests and self generated data unless you have this already saved correctly with git. You might clean the environment with https://groups.google.com/g/android-building/c/QIne5MVjO7U. If you choose to follow rm -rf * – you may be surprised to find that the hidden folder .repo (potentially ~100+ GB) …

[piero]

Save all your manifests

Argh… newbe i am !.. i deleted the previous /lineage folder

however, i already did
repo init -u https://gitlab.e.foundation/e/os/android.git -b v1-r
and
repo sync is running

[aibd]

@piero

Save all your manifests

You did

[aibd]

Is not critical, you will pull in all the /e/ sources … then when a manifest is added you will pull in the device sources.

A braver man than me would just do it on the fly! but probably not much advantage.

[piero]

so i have closed the running terminal, created the
.repo/local_manifests/gts4lv.xml, filled it (including the muppet line),

<?xml version="1.0" encoding="UTF-8"?>
<manifest>
  <project path="device/samsung/gts4lv" remote="github" name="LineageOS/android_device_samsung_gts4lv" />
  <project path="device/samsung/gts4lv-common" remote="github" name="LineageOS/android_device_samsung_gts4lv-common" />
  <project path="device/samsung/qcom-common" remote="github" name="LineageOS/android_device_samsung_qcom-common" />
  <project path="kernel/samsung/sdm670" remote="github" name="LineageOS/android_kernel_samsung_sdm670" />
  <project path="hardware/samsung" remote="github" name="LineageOS/android_hardware_samsung" />
  <project name="TheMuppets/proprietary_vendor_samsung" path="vendor/samsung" remote="github" depth="1" />
</manifest>

and openned a new terminal,
skip the repo init -u https://gitlab.e.foundation/e/os/android.git -b v1-r step
and run repo sync ( without the -j8 proposed by steadfasterfx)

Checking out: 100% (865/865), done in 30m23.102s
repo sync has finished successfully.

repo forall -c ‘git lfs pull’
source build/envsetup.sh > envsetup_01.txt
breakfast gts4lv :

antec@antec-p6-2038fr:~/android/e/gts4lv$ breakfast gts4lv
In file included from build/make/core/config.mk:291:
In file included from build/make/core/envsetup.mk:266:
build/make/core/product_config.mk:155: error: Can not locate config makefile for product "lineage_gts4lv".
16:48:05 dumpvars failed with: exit status 1
Device gts4lv not found. Attempting to retrieve device repository from LineageOS Github (http://github.com/LineageOS).
Found repository: android_device_samsung_gts4lv
Default revision: lineage-18.1
Checking branch info
Checking if device/samsung/gts4lv is fetched from android_device_samsung_gts4lv
Adding dependency: LineageOS/android_device_samsung_gts4lv -> device/samsung/gts4lv
Using default branch for android_device_samsung_gts4lv
Syncing repository to retrieve project.
Fetching: 100% (1/1), done in 0.992s
warning: Partial syncs are not supported. For the best experience, sync the entire tree.
repo sync has finished successfully.
Repository synced!
Looking for dependencies in device/samsung/gts4lv
Adding dependencies to manifest
Checking if device/samsung/gts4lv-common is fetched from android_device_samsung_gts4lv-common
Adding dependency: LineageOS/android_device_samsung_gts4lv-common -> device/samsung/gts4lv-common
Using default branch for android_device_samsung_gts4lv-common
Syncing dependencies
Fetching: 100% (2/2), done in 1.634s
warning: Partial syncs are not supported. For the best experience, sync the entire tree.
repo sync has finished successfully.
Looking for dependencies in device/samsung/gts4lv-common
Adding dependencies to manifest
Checking if device/samsung/qcom-common is fetched from android_device_samsung_qcom-common
Adding dependency: LineageOS/android_device_samsung_qcom-common -> device/samsung/qcom-common
Using default branch for android_device_samsung_qcom-common
Checking if kernel/samsung/sdm670 is fetched from android_kernel_samsung_sdm670
Adding dependency: LineageOS/android_kernel_samsung_sdm670 -> kernel/samsung/sdm670
Using default branch for android_kernel_samsung_sdm670
Syncing dependencies
Fetching: 100% (4/4), done in 5m56.505s
Mise à jour des fichiers: 100% (65355/65355), fait.
Checking out: 100% (4/4), done in 6.408s
warning: Partial syncs are not supported. For the best experience, sync the entire tree.
repo sync has finished successfully.
Looking for dependencies in device/samsung/qcom-common
Adding dependencies to manifest
Checking if hardware/samsung is fetched from android_hardware_samsung
Adding dependency: LineageOS/android_hardware_samsung -> hardware/samsung
Using default branch for android_hardware_samsung
Syncing dependencies
Fetching: 100% (2/2), done in 1.400s
warning: Partial syncs are not supported. For the best experience, sync the entire tree.
repo sync has finished successfully.
Looking for dependencies in hardware/samsung
hardware/samsung has no additional dependencies.
Looking for dependencies in kernel/samsung/sdm670
kernel/samsung/sdm670 has no additional dependencies.
Done
In file included from build/make/core/config.mk:291:
In file included from build/make/core/envsetup.mk:266:
build/make/target/product/updatable_apex.mk:24: error: _nic.PRODUCTS.[[device/samsung/gts4lv/lineage_gts4lv.mk]]: "vendor/samsung/gts4lv-common/gts4lv-common-vendor.mk" does not exist.
16:54:17 dumpvars failed with: exit status 1
In file included from build/make/core/config.mk:291:
In file included from build/make/core/envsetup.mk:266:
build/make/target/product/updatable_apex.mk:24: error: _nic.PRODUCTS.[[device/samsung/gts4lv/lineage_gts4lv.mk]]: "vendor/samsung/gts4lv-common/gts4lv-common-vendor.mk" does not exist.
16:54:18 dumpvars failed with: exit status 1

** Don't have a product spec for: 'lineage_gts4lv'
** Do you have the right repo manifest?

error

should i try with vendor/e/ instead of TheMuppets/proprietary in the .repo/local_manifests/gts4lv.xml ?
found only .repo/local_manifests/roomservice.xml
look like .repo/local_manifests/gts4lv.xml was erased by the process ?

[aibd]

The log is of breakfast gts4lv ?

So I see 4:

warning: Partial syncs are not supported. For the best experience, sync the entire tree.

I think the subject here is “please don’t interrupt during repo sync” !

I think return your .repo/local_manifests/gts4lv.xml and then repo sync “from the top”.

You might just do another “package install” pass, this time of the list in dockerfile

apt-get install -y bc bison bsdmainutils build-essential ccache cgpt clang cron \
      curl flex g++-multilib gcc-multilib git git-lfs gnupg gperf imagemagick kmod jq \
      lib32ncurses5-dev libncurses5 lib32readline-dev lib32z1-dev libtinfo5 liblz4-tool \
      libncurses5-dev libsdl1.2-dev libssl-dev libxml2 \
      libxml2-utils lsof lzop maven pngcrush \
      procps python python3 rsync schedtool squashfs-tools software-properties-common wget xdelta3 xsltproc yasm \
      zip zlib1g-dev

just in case microG has a need for anything else.

If you want to set a -j option, run

$ nrpoc

If the answer is n, run repo -j(n-1) sync

[piero]

@aibd

You might just do another “package install” pass, this time of the list in dockerfile

apt-get install -y bc bison bsdmainutils build-essential ccache cgpt clang cron \
      curl flex g++-multilib gcc-multilib git git-lfs gnupg gperf imagemagick kmod jq \
      lib32ncurses5-dev libncurses5 lib32readline-dev lib32z1-dev libtinfo5 liblz4-tool \
      libncurses5-dev libsdl1.2-dev libssl-dev libxml2 \
      libxml2-utils lsof lzop maven pngcrush \
      procps python python3 rsync schedtool squashfs-tools software-properties-common wget xdelta3 xsltproc yasm \
      zip zlib1g-dev

just in case microG has a need for anything else.

@ronnz98 could you add this to your guide ?

[piero]

i think i will one more time restarting from scratch because repo sync look stuck since i came back to diner

[piero]

@aibd

If you want to set a -j option, run

$ nrpoc

If the answer is n, run repo -j(n-1) sync

i cannot :

antec@antec-p6-2038fr:~$ nrpoc

La commande « nrpoc » n'a pas été trouvée, voulez-vous dire :

  commande « nproc » du deb coreutils (8.30-3ubuntu2)
  commande « nrnoc » du deb neuron (7.6.3-1build4)

Essayez : sudo apt install <nom du deb>

antec@antec-p6-2038fr:~$ sudo apt-get install coreutils
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
coreutils est déjà la version la plus récente (8.30-3ubuntu2).
0 mis à jour, 0 nouvellement installés, 0 à enlever et 1 non mis à jour.
antec@antec-p6-2038fr:~$ nrpoc

La commande « nrpoc » n'a pas été trouvée, voulez-vous dire :

  commande « nrnoc » du deb neuron (7.6.3-1build4)
  commande « nproc » du deb coreutils (8.30-3ubuntu2)

Essayez : sudo apt install <nom du deb>

antec@antec-p6-2038fr:~$ sudo apt-get install nrpoc
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
E: Impossible de trouver le paquet nrpoc

you wrote “nrpoc”
but if you mean nproc, output is 4, so the default repo sync command is good for me

[ronnz98]

This is already outlined in
https://wiki.lineageos.org/devices/gts4lv/build
Possibly its good to know to add
sudo apt-get install prior to all listed build packages… ie

[piero]

excuse me , i was thinking the e-docker-list was longer than the LOS one , but not.

[piero]

repo sync done in 32m24.944s.
repo forall -c ‘git lfs pull’ done.
source build/envsetup.sh > envsetup_01.txt done.
breakfast gts4lv done.
brunch gts4lv running…

yesterday,it toke (05:26:23 (hh:mm:ss) to my computer to build LineageOS for the same device,
also gute Nacht für alle…

[ronnz98]

good luck with the setup and build

[piero]

…brunch gts4lv …FAILED !… at 79%

[ 79% 89731/112241] target Prebuilt: BlissIconPack (out/target/product/gts4lv/obj/APPS/BlissIconPack_intermediates/package.apk)
FAILED: out/target/product/gts4lv/obj/APPS/BlissIconPack_intermediates/package.apk
/bin/bash -c "(rm -f out/target/product/gts4lv/obj/APPS/BlissIconPack_intermediates/package.apk ) && (cp \"prebuilts/prebuiltapks/BlissIconPack/app-release-unsi
gned.apk\" \"out/target/product/gts4lv/obj/APPS/BlissIconPack_intermediates/package.apk\" ) && (if (zipinfo out/target/product/gts4lv/obj/APPS/BlissIconPack_int
ermediates/package.apk 'lib/*.so' 2>/dev/null | grep -v ' stor ' >/dev/null) ; then out/soong/host/linux-x86/bin/zip2zip -i out/target/product/gts4lv/obj/APPS/B
lissIconPack_intermediates/package.apk -o out/target/product/gts4lv/obj/APPS/BlissIconPack_intermediates/package.apk.tmp -0 'lib/**/*.so'  && mv -f out/target/p
roduct/gts4lv/obj/APPS/BlissIconPack_intermediates/package.apk.tmp out/target/product/gts4lv/obj/APPS/BlissIconPack_intermediates/package.apk ; fi ) && (if (zip
info out/target/product/gts4lv/obj/APPS/BlissIconPack_intermediates/package.apk '*.dex' 2>/dev/null | grep -v ' stor ' >/dev/null) ; then out/soong/host/linux-x
86/bin/zip2zip -i out/target/product/gts4lv/obj/APPS/BlissIconPack_intermediates/package.apk -o out/target/product/gts4lv/obj/APPS/BlissIconPack_intermediates/p
ackage.apk.tmp -0 \"classes*.dex\" && mv -f out/target/product/gts4lv/obj/APPS/BlissIconPack_intermediates/package.apk.tmp out/target/product/gts4lv/obj/APPS/Bl
issIconPack_intermediates/package.apk ; fi ) && (build/make/tools/chromium_trichrome_patcher.py out/target/product/gts4lv/obj/APPS/BlissIconPack_intermediates/p
ackage.apk build/make/target/product/security/platform.x509.pem ) && (mv out/target/product/gts4lv/obj/APPS/BlissIconPack_intermediates/package.apk out/target/p
roduct/gts4lv/obj/APPS/BlissIconPack_intermediates/package.apk.unsigned ) && (prebuilts/jdk/jdk11/linux-x86/bin/java -XX:OnError=\"cat hs_err_pid%p.log\" -XX:CI
CompilerCount=6 -XX:+UseDynamicNumberOfGCThreads -Djava.library.path=\$(dirname out/soong/host/linux-x86/lib64/libconscrypt_openjdk_jni.so) -jar out/soong/host/
linux-x86/framework/signapk.jar  build/make/target/product/security/platform.x509.pem build/make/target/product/security/platform.pk8  out/target/product/gts4lv
/obj/APPS/BlissIconPack_intermediates/package.apk.unsigned out/target/product/gts4lv/obj/APPS/BlissIconPack_intermediates/package.apk.signed ) && (mv out/target
/product/gts4lv/obj/APPS/BlissIconPack_intermediates/package.apk.signed out/target/product/gts4lv/obj/APPS/BlissIconPack_intermediates/package.apk )"
java.util.zip.ZipException: zip END header not found
	at java.base/java.util.zip.ZipFile$Source.zerror(ZipFile.java:1535)
	at java.base/java.util.zip.ZipFile$Source.findEND(ZipFile.java:1436)
	at java.base/java.util.zip.ZipFile$Source.initCEN(ZipFile.java:1443)
	at java.base/java.util.zip.ZipFile$Source.<init>(ZipFile.java:1274)
	at java.base/java.util.zip.ZipFile$Source.get(ZipFile.java:1237)
	at java.base/java.util.zip.ZipFile$CleanableResource.<init>(ZipFile.java:727)
	at java.base/java.util.zip.ZipFile$CleanableResource.get(ZipFile.java:844)
	at java.base/java.util.zip.ZipFile.<init>(ZipFile.java:247)
	at java.base/java.util.zip.ZipFile.<init>(ZipFile.java:177)
	at java.base/java.util.jar.JarFile.<init>(JarFile.java:346)
	at java.base/java.util.jar.JarFile.<init>(JarFile.java:317)
	at java.base/java.util.jar.JarFile.<init>(JarFile.java:297)
	at com.android.signapk.SignApk.main(SignApk.java:1146)
05:20:40 ninja failed with: exit status 1

#### failed to build some targets (05:51:28 (hh:mm:ss)) ####

link to my latest /out files… i go back to sleep a few more … ( already sleeped 4 hours, but it is not enought) …

[ronnz98]

I think I had this one.
Be careful while using this command

repo forall -c ‘git lfs pull’

ie you have to use the correct apostophes! Then the comannd will take a while until all prebuild apps are downloaded

rerun bruch gts4lv again