S9+ They say there is an update to Q but

/e/OS Devices Samsung
,
21

Good evening,

Unfortunately I have some issues with the upgrade as well.
My Glaxy S9+ was flashed to /e/ with the Easy Installer. When I wanted to update to O the option “OEM Unlock” was not visible. I tried all recommended fixes, but nothing worked.

Next things I did, smart or not (probably the last):

I updated TWRP to the latest version (which succeeded)
I flashed the /e/ recovery image: recovery-e-0.13-q-2021012097133-dev-star2lte.img (succeeded too)
I tried to flash e-0.13-q-2021012097133-dev-star2lte.zip by using TWRP. Unfortunately, my phone is in a bootloop when I restart it, I get the error:

=====================
Vendor image on device is NOT compatible
Expected Android 10 vendor

Does this mean I have to upgrade to the latest Samsung Firmware? How do I do that, since I can’t find the exact model number of my phone in recovery.

Thanks

22

Yeah, that’s exactly what it means!

Read all current threads, e.g. Galaxy S9 'starlte’ and Galaxy S9+ ‘star2lte’ to find the solution to your problem. Under no circumstances should you currently use the /e/asy installer. It does not load the latest /e/ ROM ‘Q’ at the moment.

23

Ok, I finally got the phone to boot with stock Samsung ROM… I had to find a Windows box, find version 3.14.1 of Odin (as neither Heimdall (on Linux) nor Odin 3.10.1 (on Windows) worked*).
Now… how do I get back to /e/OS (Q)…!?
Is the easy-installer v0.11.2-beta compatible with Android Q, or will it somehow try to downgrade and eventually break the phone ? If it iss not compatible, is there an howto I should follow ?

Thanks again for your support
Franck

  • heimdall failed with ERROR: Failed to receive session end confirmation!
  • Odin 3.10 was just stuck with no message
24

Oh… I just read your last comment right now ! So no easy_installer, I’ll read the relevant thread for S9+ star2lte.

25

Excellent. All signs are now set for success!

  1. First, you unlock the OEM Unlock in StockROM 10 of the S9+. Without it, you will not be able to continue.

  2. Then flash a custom recovery: eRovery or TWRP 3.5.0_9-0.

  3. Finally, install the e-0.13-q*.zip with the help of this custom recovery. A reliable help is here.

26

Hurray ! Back to /e/, with e-0.13-q !

Many thanks

27

How do you like it so far?

28

:+1: Do not forget to set more privacy!

Settings
Network and Internet

DNS
DNS Configuration
Use network DNS - disable -

DNS
Set DNS Use
Enter DNS IP
9.9.9.9

Back to Network and Internet

Advanced
Data Saver, VPN, Private DNS

Private DNS
Selcet private DNS mode
[x] Private DNS provider hostname
anycast.censurfridns.dk [for example]
Save

29

Hi.

Well, for now it’s not son different from e 0.13 in its aosp 8 version
Main difference for me is that text and icons are very small… I had to set accessibility options to make it readable :slight_smile:

But I still have to explore it a bit, obviously !

1 Like
30

i did that, thanks. Notice however that Private DNS option does not play well with TrackerControl. I had to disable it.

31

Yeah, TrackerControl is a difficult tool and the handling of it needs to be practiced, this means as much as: every medal has two sides.

32

OK finally got it to boot into /e/ OS again…

Build Number: e_star2lte-userdebug 8.1.0 OPM7.181205.001 ebef99465c dev-keys
Baseband: G965FXXUCFTJ1

Thanks for the help

33

Which version of the /e/OS is this v0.13 or v0.14

34

Look in the filename. -o- for Oreo vs -q- for Q.

35

NM.

So one problem was Odin was version 3.12 needed 3.13 or higher for the program to recognize the new compression Samsung uses on the firmware files apparently. My bad, website I downloaded Odin from said it was the latest version, dag what a bunch of time wasted with that problem…

Have Andoid 10 installed! Yea! Now off to -q- version

36

Hello SuzieQ,

Thanks for your answer, I didn’t have time to look at my Samsung earlier.

I have the latest TWRP and the recovery-e-0.13-q-2021012097133-dev-star2lte.img recovery.

I have installed ADB, can I sideload the Oreo version to go back to the previous Android version? Do you know where I can find the download? On the site, I can only find the Q-version.

I am also downloading the Samsung 10 firmware. I bought a European model, can I just select the country where I live, or does it has to match exactly with the current firmware?

Probably stupid question, but can the firmware be installed with ADB? I also have Heimdall on my Linux, can that be used for installing the firmware, while the phone is in download mode?

I have to choose my best option to get out of this recovery situation (back to O, or forward to Q).

Thanks.

37

Update: I managed to go back to the Oreo version by using the Zip file I found in the Easy Installer folder.

Does anyone has an idea whether or not the Easy Installer can be used to upgrade to Q in the near future?

Otherwise I have to get Android 10 on my phone first. Thanks.

38

Easy Installer can not be used yet…for -q- that is.

39

When will it be possible to install the android Q version on a galaxy S9 with the easy installer?

40

@Randy: I mentioned the Easy Installer since, I think Manoj, mentioned not long ago that developers MIGHT would look at updating the Easy Installer, so it could be used to upgrade to Q.

With respect to manually upgrading, I tried with Heimdall on Linux, but did not succeed. Seems to be more complicated than Odin. I get confused with which files to use, can’t find an exact manual. For now I have to stay with O.

I bought the Galaxy S9+ because the Easy Installer could be used and expected to be able to subsequently use OTA. I think also many people bought the Galaxy S9(+) phones in the shop, so they didn’t have to flash /e/ themselves.

If possible, it would be nice if the Easy Installer can be updated, so non-experts like me can get the upgrade as well.