Pixel 6. eOS installs and starts up but stops at Setup wizard. I installed eOS on my old Pixel 3a without problem and love it. But I can’t get past the setup wizard. Just a blank screen. I searched for the keywords but nothing turned up. eOS version e-3.0.4-a15-20250712508365-community-oriole.zip.
Any help would be greatly appreciated.
Regain your privacy! Adopt /e/OS the deGoogled mobile OS and online services
Maybe try sensing pictrues or a video from the point where it works until it goes blank.
First try reboot if necessary from Recovery then try Factory reset from Recovery.
Thank you both for your replies. Tried your recommendations and many others to no avail. It seems setup wizard must complete in order to use eOS. The Pixel 6 is accessible via recovery but mtp shows nothing and pop up window states phone could not be connected. I suspect I missed a step where I needed to enable USB Debugging.
A new install ofc has USB debugging off 
Perhaps worth next checking that you can reach the phone in e-Recovery with
adb devices
From the install page Install /e/OS on a Google Pixel 6 - “oriole” were you sure to
Before following these instructions please ensure that the device is on the latest Android 15 firmware.
If yes (is important) … just send the /e/OS main ROM again
adb sideload e-3.0.4-a15-20250712508365-community-oriole.zip
adb devices is working
Currently andoid 15
flashed images and oriol zip but no go. Am still stuck a black screen after setup wizard stops. Can I do my own setup? If not it’s a new phone and no more /e/OS.
Please can you confirm if you saw e-Recovery for sure.
Please can you confirm if you boot system you see a black screen with an animation of e with bouncing dot.
If the First start wizard stops I think it will be impossible to go further.
In which case perhaps you should prepare to reinstall the Stock ROM perhaps using Android Flash Tool.
Definitely saw e-Recovery
Startup starts at bootloader warning, then e with bouncing dot, then box notice that setup wizard keeps stopping.
Indeed, the first setup wizard stops and a black screen with 3 button navigation and nothing else.
That’s why I wondered if I could conduct setup myself but apparently not.
I am having this same issue with 7a too, any others come up with a solution?
Not sure if it is a solution at least for the 7a, reinstalled A14 and then installed A15 and then I was able to successfully install the 3.0.4 A15 addition and Wizard Setup worked