Week 23, 2022: Development and Testing Updates

[Manoj]

It should be available now through the updater on the phones…pl check.

[bro4k20]

Upgrade is avaible

[stavro]

Still nothing 'til now; is this because of my location? (Reunion Island) [sorry for my bad english]. Thanks in advance

[Frilouz]

Thank you very much.
The update went well and the phone works well in v1.0 now
Thank you very much for your assistance and good luck with the continuation of Murena. It’s a great and important adventure !
Thank you and have a nice evening.

[timothys_monster]

Sorry, maybe I was a bit unclear. I mean, will I find them under one of these two links once they are available for manual download (to adb sideload them via USB)? Or is there another place to look for v1.0?

https://images.ecloud.global/dev/herolte/
https://images.ecloud.global/stable/herolte/

[Manoj]

The builds should be available for manual download later today …10 June
at present the locations show the older builds

[timothys_monster]

Thank you!!! And sorry for my impatience

[Manoj]

The s7 / s7+ device updater should be available for download now on the phone.

The manual downloads should be enabled later today

[stavro]

en cours! Thanks!

[timothys_monster]

It’s here! Thank you so much!!!

[Manoj]

All pl note : The s7 / s7+ builds OS OTA upgrade or the manual downloads for the s7 / s7+ will not be available over the weekend. We will resume the downloads on Monday 13 June. This is being done to avoid issues during the weekend.

[loki]

I’ve just seen that post. I was waiting for Pie update fro my Xiaomi Mi 8.
I will have to try to upgrade from Pie to Q.

[karibooooo]

@loki I’ve updated my old Mi8 to /e/ v1.0 (android 11) and everything looks well.

[loki]

hi, @karibooooo it’s not me that flashed the first time my phone
I looked at this thread, now closed,

Upgrade Xiaomi Mi8 to /e/ Q and reverse

Hello! Today I come to comment my experience with /e/ on a Xiaomi Mi 8. I installed /e/ pie, prior downgrade on my Xiaomi, I’ve had it for two months, working properly, except for the bluetooth that gives me micro-cuts when playing music from the bluetooth device in the car. Yesterday I was reviewing the manual update method to upgrade to /e/ 0.14-q. I will shortly indicate the process I followed: 1.- We have to update the Xiaomi Mi8 firmware for Android 10, we can download it from here: htt…

and it is said I must upgrade the firmware before the OS,
but I only found those firmware
https://xiaomifirmwareupdater.com/firmware/dipper/
where did you found the firmware for android 11 ?
(maybe you could open a thread about how upgrading to R ?)

[karibooooo]

@loki

1. You could download Miui recovery and firmware on Mi 8 (dipper) MIUI Downloads | Xiaomi Firmware Updater
2. If you’ve choosen Q (android 10) for Miui version, then, to get /e/ for Q, go on /e/ image ROM download
3. Then, you could upgrade to /e/ v.1.0 from e-0-22 or 23

Don’t forget to follow steps fir Mi8 (dipper) on
Info about Xiaomi Mi 8 - dipper

[loki]

ok,thanks
but how did you get android 11 (R) on your device ?
(I don’t find firmware update to android 11)

[tcecyk]

@Manoj

Not sure if the surnia (Moto E 2015)is in that list. Will share the updated stable builds list once I get it from the team.

surnia has the same SoC as a harpia and osprey that both saw a 1.0 release and are on Q. Surnia had a 0.23 build though. If there are build errors I could go after them if I can access the build log @Manoj

(there are unofficial lineage 19 builds for both surnia and harpia at xda, will be interesting if those ever come back to official 19)

[karibooooo]

@loki Android 11 on Mi 8: with the last update of /e/. V.1.0 (as attached)

[timothys_monster]

I successfully installed the stable version of /e/ v1.0 (Q) on my Samsung Galaxy S7 and am very pleased with the experience so far! Big up to the whole team for supporting all of these devices still