Fairphone - FP3 - FP3+ Documentation Suggestions

[AnotherElk]

@techminimalism

The instructions say this:

• The script will flash all required files and will wait for input at the last step.
• The last command will ask you to confirm on the device to lock the bootloader.
• Select LOCK THE BOOTLOADER with Volume + and validate with Power button.

(The bullet points were aligned under the Windows subsection but I assume they’re for both Windows/Linux as post #58 here also has the same steps.)

I did not get this. I just got the following at the end in my Terminal:

INFO: Done. The device will reboot now.
Rebooting                                          OKAY [  0.012s]
Finished. Total time: 0.062s

INFO: You can unplug the USB cable now.

Can anyone explain why I did not get the step to re-lock the bootloader? I do not want to use a phone with an unlocked bootloader.

I had a look at the flashing scripts in the /e/OS 2.8 releases for FP3, and I don’t see any command trying to lock the bootloader.
While that might be just me and my untrained eye, it is backed up by the issue description above.

@Manoj … Is there a documentation issue in this regard, or an issue with the current flashing scripts?