Feedback for v1.9

/e/OS Smartphone Operating System Build Feedback
1

Please share feedback on the v1. 9 build for your devices and how it is working with application you use.

Refer category description here

Builds will be rolling out in a staggered manner over the next couple of days. It will be released for a few devices at a time.

We will also have a poll to rate this build.

  • I have updated to v1.9 on my device and it is working well
  • I updated to v1.9 but I am having issues (Please share the issue details on this thread)
  • I am not able to update to v1.9 (Please share the issue details on this thread)

0 voters

When sharing your feedback or issues, Please add the following details

  • Vendor Name

  • Device name

  • Device CodeName

  • Version of /e/OS or Stock which existed previously

  • Is the device Rooted / Not rooted

Refer this table for vendor, codename details

Refer this guide to share more details in your feedback

8 Likes
2

Fairphone 3+, previously on 1.8.1-S-dev, not rooted.
1.9-S-dev update became available OTA at midnight CET, took significantly longer to complete than the 1.8.1-S-dev.

First vague impression: The significant camera (GCam) launching and HDR processing lags (which I only first realized last week) seem to be gone at first try. No more testing yet.

3 Likes
3

English version below:

Bonjour
sur Xiaomi MI10T (Gauguin) j’ai lancĂ© la mise Ă  jour de 1.8.1 vers 1.9.
C’est ma premiĂšre mise Ă  jour OTA puisque j’ai directement installĂ© /e/OS 1.8.1 dĂšs rĂ©ception de l’appareil.

Au redémarrage, aprÚs préparation, TWRP indique ce message:

Keep system read only
TWRP can leave your system partition unmodified to make it easier for you to take official updates.
TWRP will be unable to prevent the stock ROM from replacing TWRP and will not offer to root your device.

Je pense que je dois pouvoir utiliser le zip pour forcer l’installation Ă  la main, mais de mes autres expĂ©riences la mise Ă  jour OTA devrait faire le boulot.
Au redĂ©marrage depuis TWRP, il m’indique ne pas avoir installĂ© d’OS, mais ça fonctionne (toujours en 1.8.1)
Est-il possible d’avoir un peu d’aide ?

Hello

On Xiaomi MI10T (Gauguin) I launched the update from 1.8.1 to 1.9.

It’s my first OTA update since I directly installed /e/OS 1.8.1 when I received the device.

On reboot, after preparation, TWRP shows this message:

Keep system read only
TWRP can leave your system partition unmodified to make it easier for you to take official updates.
TWRP will be unable to prevent the stock ROM from replacing TWRP and will not offer to root your device.

I think I should be able to use the zip to force install by hand, but from my other experience the OTA update should do the job.
When I restart from TWRP, it tells me that I have no OS installed, but it works (still in 1.8.1)

Is it possible to get some help?

4
  • OnePlus
  • 9 Pro
  • LE2127 (Not supported)
  • /e/OS 1.8.1-s
  • Not rooted

It’s working fine for now, i just update via OTA. Thanks!

1 Like
5

Oneplus 5T from 1.8 to 1.9, works 100% so far

6
  • Vendor Name Shift
  • Device name Shift6mq
  • Device CodeName axolotl
  • Version of /e/OS or Stock which existed previously eOS 1.8.1-s-dev (not the exact name)
  • Is the device Rooted / Not rooted rooted

Everything is working fine !

1 Like
7

Vendor Name : Xiaomi
Device name : MI8
Device CodeName : Dipper
Version which existed previously : e-1.8.1-s-20230203257074-dev-dipper
Is the device Rooted / Not rooted : rooted
Manual upgrade because the device doesn’t detect new release.

It’s not my daily device, so I just use it from time to time, but as far as I test it, everything is OK.

1 Like
8

Asus
Zenfone 8
Sake
e/OS-1.8.1-s
Not rooted

All seems to be working well, except for the notes app: unable to connect with my nextcloud server
OTA install

Edit:
I managed to make notes work!
You must first install the Nextcloud application.
Once the account has been added to Nextcloud, it is possible to select it in Notes

1 Like
9

Depuis android 10 il faut le “recovery-e” pour que l’updater fonctionne automatiquement,
avec TWRP tu dois autoriser les modifications (lors du premier dĂ©marrage de TWRP), puis cliquer sur “install” et pointer vers le fichier e-1.9 qui se trouve dans le dossier “/data/lineageos_updates”

In English :

Since android 10 you need the “recovery-e” for the updater to work automatically,
with TWRP you have to authorize the modifications (at the time of the first starting of TWRP), then click on “install” and point towards the file e-1.9 which is in the folder “/data/lineageos_updates”

1 Like
11

Merci @piero pour ton retour.
avant de flasher le bootloader avec er-ecovery, j’ai essayĂ© d’appliquer la mise Ă  jour manuellement vie TWRP. (Install choix du zip).
La procédure passe sans encombre mais au redémarrage, je suis toujours en 1.8.1 et les appli Mail et Note sont cassées

12

Hier soir, j’ai vu ce fil, mais je n’avais pas reçu de notification, et en recherchant de nouvelle mise Ă  jour, l’updateur ne trouvait rien (il y a toujours un petit dĂ©lais dans le dĂ©ploiement sur les serveurs OTA).
Impatient, j’ai donc tĂ©lĂ©chargĂ© moi-mĂȘme le fichier depuis le site de /e/

J’ai installĂ© sans probleme e-1.9-r sur mon Samsung Galaxy s4active (jactivelte) depuis e-1.8.1-r en utilisant
–>TWRP -->install
Toujours pas de barre de navigation sur cet appareil (utile pour l’utilisation de"scrcpy")

In English :

Yesterday evening, I saw this thread, but I hadn’t received any notification, and while searching for new updates, the updater couldn’t find anything (there is always a small delay in the deployment on OTA servers).
Impatient, I downloaded the file myself from the /e/ website.

I installed e-1.9-r on my Samsung Galaxy s4active (jactivelte) from e-1.8.1-r using
–>TWRP -->install
Issue : still no navigation bar available for this device in -->system -->boutons (usefull using “scrcpy”)

1 Like
13

S8 (950F) sous 1.9-2023300310268
non rooté
était déja sous 1.9

Pas de problĂšme constaté 

14

English version bellow
Je récapitule mes derniers essais
TĂ©lĂ©chargement manuel de l’archive ZIP e-1.9-s-20230311268558-dev-gauguin.zip
DĂ©marrage sous TWRP et installation du ZIP. => pas d’erreur
Redémarrage sour /e/OS => toujours en 1.8.1

image
image411×606 57.1 KB

et appli mail et notes “cassĂ©es” avec logo droid
image

suite à remarque de @piero sur le recovery, j’ai mis celui de /e/
Pas d’erreur dans la procĂ©dure de mise Ă  jour mais rĂ©sultat identique

Une idée pour la suite ?

Si je rĂ©installe le zip de la version 1.8.1, est ce que j’ai toutes mes chances que ça fonctionne en attendant la version suivante ou une 1.9.1 ?

Merci encore
In English
I summarize my last tests
Manual download of the ZIP archive e-1.9-s-20230311268558-dev-gauguin.zip
Start under TWRP and install the ZIP. => no error
Restarted on /e/OS => still in 1.8.1 and mail application and notes “broken” with droid logo

following @piero’s remark about the recovery, I put the one of /e/
No error in the update procedure but same result

ny ideas for the next step?
If I reinstall the zip of version 1.8.1, do I have all my chances that it works while waiting for the next version or a 1.9.1?

Thanks again

[EDIT] J’ai crĂ©Ă© un sujet spĂ©cifique pour ne plus poluer celui-ci : [MI10T Lite Gauguin] Soucis de mise Ă  jour / OTA update failed,

15

Installed on rooted OnePlus 9. Took the update / install. Set Magisk to pre-flash itself in inactive slot (in-app setting), rebooted, and all is great. No hick ups, no errors. Buttery smooth.

16

Android 'S’
e-1.9-s-20230312268558-dev-sagit.zip

Vendor Name: Xiaomi
Device name: Mi 6
Device CodeName: sagit
Version of /e/OS which existed previously: /e/OS 'R’ V1.5
Is the device not rooted.

The first impression after the upgrade is a very good one.

:point_up: Thank you very much for the continued development of /e/OS ‘Q’ GSI.

17

OnePlus 7T Pro ‘hotdog’ massively flawed (!)

Upgrade Android S e-1.9-s-20230312268558-dev-hotdog

I did an upgrade from /e/OS V1.6-r (Android R) with /e/Recovery to /e/OS V1.9-s (Android S) via adb sideload. The system boots, but the touch screen does not respond.

Pressing the power button brings up the menu with the four buttons Emergency | Power Off | Restart | Screenshot, but - the commands are not accepted.

Any screen touch is ignored by the system. The system cannot be turned off via the device key Power.

I could only get into the /e/recovery via adb reboot recovery.

I repeated the /e/OS ‘S’ upgrade via adb sideload. The result was just as erroneous.

A downgrade to /e/OS ‘R’ 1.8.1-r was not possible.

Of course I had not made a backup, but - my lifeline was LineageOS 20 by LineageOS Android Distribution.

I installed via
fastboot flash dtbo dtbo.img
fastboot flash vbmeta vbmeta.img
as well as
fastboot flash recovery recovery.img
most recently
lineage-20.0-20230314-nightly-hotdog-signed.zip.

The LOS 20.0 installation was flawless, the touch screen responds to input as it should. My installed apps and personal data remained intact.

Hui, once again lucky.

2 Likes
18

Vendor name: Motorola
Device name: Edge S / Moto G100
Device codename: Nio
Previous version: 1.8.1-S
Device is NOT rooted

Everything is working perfect.

19

Vendor: Fairphone
Device: Fairphone 3
Device codename: FP3
Previous version: 1.8.1-S-dev
Device is not rooted

Everything works fine after 1.8.1 was a bit slow and system-UI crashes are gone as well.

4 Likes
20

Is there a release plan like there was for v1.8? Can’t seem to find it.

21

I would say it works like the last times, release to 25% couple days later 100% and 25% of stable and so on.

1 Like